Introducción

This installation guide will help you with the following:

  • removing foam disk
  • decreasing the bass

Partes

No se requieren partes.

Remove the ear pads by peeling them away from the grill.
  • Remove the ear pads by peeling them away from the grill.

Agregar Comentario

Remove all four 1cm screws on the inside of the headphone using a #1 Phillips head.
  • Remove all four 1cm screws on the inside of the headphone using a #1 Phillips head.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Remove the speaker from the grill by pulling it out.
  • Remove the speaker from the grill by pulling it out.

  • Remove the speaker carefully so you do not rip the wires out.

Agregar Comentario

Remove the foam disk from the grill by peeling it away from the grill. During reassembly, make sure that the speaker is angled into your ear canal.
  • Remove the foam disk from the grill by peeling it away from the grill.

  • During reassembly, make sure that the speaker is angled into your ear canal.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Melanie Reis

Miembro Desde 11/01/13

106 Reputación

5 Guías creadas

Equipo

Cal Poly, Team 17-19, Forte Winter 2013 Miembro de Cal Poly, Team 17-19, Forte Winter 2013

CPSU-FORTE-W13S17G19

6 Miembros

6 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 4

Últimos 30 Días: 11

Todo El Tiempo: 1,118