Partes

No se requieren partes.

Remove the screws from the bottom, right, and left side of camera. Remove the screws from the bottom, right, and left side of camera. Remove the screws from the bottom, right, and left side of camera.
  • Remove the screws from the bottom, right, and left side of camera.

Agregar Comentario

Remove the back of the camera, may require force.
  • Remove the back of the camera, may require force.

Agregar Comentario

Unscrew the right metal bracket of the viewing lens
  • Unscrew the right metal bracket of the viewing lens

Agregar Comentario

Unscrew the top right corner screw
  • Unscrew the top right corner screw

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Unscrew the bottom right corner screw.
  • Unscrew the bottom right corner screw.

Agregar Comentario

Pull the grey circular facet that sits on the bottom outside of the camera off - may have to use force. Pull the grey circular facet that sits on the bottom outside of the camera off - may have to use force.
  • Pull the grey circular facet that sits on the bottom outside of the camera off - may have to use force.

Agregar Comentario

Pull the front of the camera off of the mother board. Pull the front of the camera off of the mother board.
  • Pull the front of the camera off of the mother board.

Agregar Comentario

Unhinge the outer case of the screen from the back of the camera. The screen should still be hanging by wires.
  • Unhinge the outer case of the screen from the back of the camera. The screen should still be hanging by wires.

Agregar Comentario

Remove outer case/rim of screen from the back of the camera. The screen should still be hanging by the red wire and white wire.
  • Remove outer case/rim of screen from the back of the camera. The screen should still be hanging by the red wire and white wire.

Agregar Comentario

Pull out the red wire and white wire attaching the screen to the motherboard.
  • Pull out the red wire and white wire attaching the screen to the motherboard.

Agregar Comentario

Flip up black lever holding data cable to motherboard, and remove data cable from motherboard.
  • Flip up black lever holding data cable to motherboard, and remove data cable from motherboard.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Melissa

Miembro Desde 12/02/13

240 Reputación

2 Guías creadas

Equipo

Ohio State, Team 1-2, Buehl Spring 2013 Miembro de Ohio State, Team 1-2, Buehl Spring 2013

OSU-BUEHL-S13S1G2

2 Miembros

5 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 1

Todo El Tiempo: 132