Saltar al contenido principal

Reconnecting Screen to Logic Board Guide

Qué necesitas

  1. Reconnecting Screen to Logic Board Guide, Screen: paso 1, imagen 1 de 1
    • Flip the device over

  2. Reconnecting Screen to Logic Board Guide: paso 2, imagen 1 de 1
    • Unscrew the 2 screws closest to the screen

  3. Reconnecting Screen to Logic Board Guide: paso 3, imagen 1 de 1
    • Flip the device back over

    • It is now standing right side up

  4. Reconnecting Screen to Logic Board Guide: paso 4, imagen 1 de 1
    • Unscrew the top.

  5. Reconnecting Screen to Logic Board Guide: paso 5, imagen 1 de 1
    • Take the top of the device off.

  6. Reconnecting Screen to Logic Board Guide: paso 6, imagen 1 de 1
    • Unscrew the button board.

  7. Reconnecting Screen to Logic Board Guide: paso 7, imagen 1 de 1
    • Take off the button board.

  8. Reconnecting Screen to Logic Board Guide: paso 8, imagen 1 de 1
    • Unscrew all visible screws on the black logic board cover.

  9. Reconnecting Screen to Logic Board Guide: paso 9, imagen 1 de 1
    • Lift the screen straight up out of the device.

  10. Reconnecting Screen to Logic Board Guide: paso 10, imagen 1 de 1
    • Check that the single input plug from the logic board to the screen (reverse side) is completely pushed in by pressing it firmly into the socket.

    • Also check that the 2 output plugs from the screen to the logic board are completely pushed in by pressing them firmly into the highlighted sockets.

    • You have successfully reconnected your display screen.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Nick Sherman

Miembro Desde 09/26/12

31 Reputación

1 Guía escrita

Equipo

Cal Poly, Team 7-50, Forte Fall 2012 Miembro de Cal Poly, Team 7-50, Forte Fall 2012

CPSU-FORTE-F12S7G50

5 Miembros

7 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 7

Todo El Tiempo: 572