Saltar al contenido principal

Razor A Handle Grips Replacement

Qué necesitas

  1. Razor A Handle Grips Replacement, Handle Grips: paso 1, imagen 1 de 2 Razor A Handle Grips Replacement, Handle Grips: paso 1, imagen 2 de 2
    • If the scooter does not already have handle grips, skip to step 2.

    • Locate the handle grips at the upper ends of the T-tube.

    • Be careful to keep the scissors away from your other hand while cutting the handle grips.

    • Wedge one end of a pair of scissors between the metal T-tube and a handle grip, with the cutting edge toward the handle grip. Cut the handle grip off.

    • Repeat for the other handle grip.

  2. Razor A Handle Grips Replacement: paso 2, imagen 1 de 2 Razor A Handle Grips Replacement: paso 2, imagen 2 de 2
    • Soak the replacement handle grips in warm water for 2-3 minutes.

    • The longer you soak the handle grips in water, the larger they get. Soaking the handle grips for a long time will not damage them.

  3. Razor A Handle Grips Replacement: paso 3, imagen 1 de 2 Razor A Handle Grips Replacement: paso 3, imagen 2 de 2
    • Each handle grip should now slide onto the T-tube with ease. If not, soak the handle grip(s) in warm water for another 1-3 minutes.

    • Holding the T-tube with one hand, slide a handle grip completely onto the T-tube.

    • Repeat for the other handle grip if installing both.

    • Let the handle grips dry for 24 hours before use.

Linea de Meta

Una persona más ha completado esta guía.

Jordyn

Miembro Desde 10/09/12

544 Reputación

5 Guías creadas

Equipo

Cal Poly, Team 9-13, Amido Fall 2012 Miembro de Cal Poly, Team 9-13, Amido Fall 2012

CPSU-AMIDO-F12S9G13

4 Miembros

10 Guías creadas

Un comentario

I have found the Razor A5 Lux Scooter the best kick scooter for daily commuting.

Mathew Sam - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 5

Ultimos 30 días: 24

Todo El Tiempo: 4,808