Introducción

This processor board also includes L2 cache. It is not soldered to the logic board, so installing a replacement is very easy.

Turn the computer so that the ports are facing you.
  • Turn the computer so that the ports are facing you.

  • If the keyboard is locked, open the port cover and turn the keyboard locking screw until the keyboard is unlocked.

Agregar Comentario

Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.
  • Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.

  • Make sure you have removed the laptop battery and CD/DVD module from the expansion bays before proceeding.

Agregar Comentario

Lift the keyboard out by pulling it up and away from you. Rest the keyboard, face down, on top of the trackpad.
  • Lift the keyboard out by pulling it up and away from you. Rest the keyboard, face down, on top of the trackpad.

  • In order to replace the keyboard, you must first remove the modem.

Agregar Comentario

Remove the three silver Phillips screws that attach the heat shield to the internal metal framework.
  • Remove the three silver Phillips screws that attach the heat shield to the internal metal framework.

Agregar Comentario

Lift the heat shield up and pull it toward you.
  • Lift the heat shield up and pull it toward you.

Agregar Comentario

Your laptop should look approximately like this.
  • Your laptop should look approximately like this.

Agregar Comentario

Pull the battery cable directly up from the logic board.
  • Pull the battery cable directly up from the logic board.

Agregar Comentario

Remove the battery from its holder by pulling up and to the left.
  • Remove the battery from its holder by pulling up and to the left.

Agregar Comentario

Remove the two silver Phillips screws from the modem.
  • Remove the two silver Phillips screws from the modem.

Agregar Comentario

Use a spudger, the tips of your fingers, or a flat non-metal tool to get under the modem's edge and pry it up from its socket as shown in the picture.
  • Use a spudger, the tips of your fingers, or a flat non-metal tool to get under the modem's edge and pry it up from its socket as shown in the picture.

Agregar Comentario

Disconnect the cable from the right side of the modem.
  • Disconnect the cable from the right side of the modem.

Agregar Comentario

Your laptop should look approximately like this.
  • Your laptop should look approximately like this.

Agregar Comentario

Use a spudger, the tips of your fingers, or a flat non-metal tool to pry up the processor's right side.
  • Use a spudger, the tips of your fingers, or a flat non-metal tool to pry up the processor's right side.

Agregar Comentario

Disconnect the keyboard cable from the logic board by pulling directly up on the clear plastic loop.
  • Disconnect the keyboard cable from the logic board by pulling directly up on the clear plastic loop.

  • This step is out of sequence with the keyboard because in order to remove the keyboard you must first remove the modem.

Agregar Comentario

Your laptop should look approximately like this.
  • Your laptop should look approximately like this.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

5 personas más completaron esta guía.

Documentos Adjuntos

iRobot

Miembro Desde 24/09/09

1 Reputación

754 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 2

Todo El Tiempo: 5,425