Saltar al contenido principal

Power Mac G4 Quicksilver Hard Drive Assembly Replacement

Qué necesitas

  1. Power Mac G4 Quicksilver Hard Drive Assembly Replacement, Hard Drive Assembly: paso 1, imagen 1 de 1
    • The hard drive is located in the back right corner of the case.

  2. Power Mac G4 Quicksilver Hard Drive Assembly Replacement: paso 2, imagen 1 de 1
    • Remove the flat ribbon cable by pulling with substantial force.

  3. Power Mac G4 Quicksilver Hard Drive Assembly Replacement: paso 3, imagen 1 de 1
    • Remove the screw holding the hard drive to the computer.

  4. Power Mac G4 Quicksilver Hard Drive Assembly Replacement: paso 4, imagen 1 de 1
    • Pull the drive up and out of the computer.

  5. Power Mac G4 Quicksilver Hard Drive Assembly Replacement: paso 5, imagen 1 de 1
    • Remove the multicolored cable by grasping the plastic connector on either side and pulling with substantial force.

Conclusión

To reassemble your device, follow these instructions in reverse order.

10 personas más completaron esta guía.

Ryan Bylard

Miembro Desde 01/20/10

1,325 Reputación

5 Guías creadas

Equipo

Cal Poly, Team 14-41, Regan Winter 2010 Miembro de Cal Poly, Team 14-41, Regan Winter 2010

CPSU-REGAN-W10S14G41

4 Miembros

17 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 7

Todo El Tiempo: 7,342