Introducción

This guide details the removal of the main fan from the fan housing.

Pull on outer latch. Lower door until it is level with your work surface.
  • Pull on outer latch.

  • Lower door until it is level with your work surface.

  • Before working on the computer make sure it is not plugged into a power supply, then touch a metal object. This discharges static electricity, which could damage the computer.

Agregar Comentario

Remove the screw from each of the two niches on lower part of fan using the Phillips #1 screwdriver. The fan housing will still be connected to the computer by a power cable which will be removed in the next step.
  • Remove the screw from each of the two niches on lower part of fan using the Phillips #1 screwdriver.

  • The fan housing will still be connected to the computer by a power cable which will be removed in the next step.

Agregar Comentario

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Remove the power cable from the fan and detach bracing.
  • Remove the power cable from the fan and detach bracing.

Agregar Comentario

To fully remove the fan, unfasten the 4 screws on the front of the bracing using the Phillips #2 screwdriver.
  • To fully remove the fan, unfasten the 4 screws on the front of the bracing using the Phillips #2 screwdriver.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Stephen Scruggs

Miembro Desde 20/01/10

2,017 Reputación

2 Guías creadas

Equipo

Cal Poly, Team 13-24, Maness Winter 2010 Miembro de Cal Poly, Team 13-24, Maness Winter 2010

CPSU-MANESS-W10S13G24

4 Miembros

13 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 3

Últimos 30 Días: 14

Todo El Tiempo: 6,103