Repara tus cosas Comunidad Tienda

Power Mac G4 Cube Airport Card Replacement

Introducción

Installing the Airport Card involves removing the outer case.

  1. Power Mac G4 Cube Airport Card Replacement, Remove Cube Core: paso 1, imagen 1 de 3 Power Mac G4 Cube Airport Card Replacement, Remove Cube Core: paso 1, imagen 2 de 3 Power Mac G4 Cube Airport Card Replacement, Remove Cube Core: paso 1, imagen 3 de 3

    • Release the handle at the bottom of the Power Mac G4 Cube by pushing it down. Slowly pull out the cube by holding the end of the handle.

    • Watch for any parts that may become entangled with the outer case.

    • Push back the handle after you have taken the core out of the case.

    Traducir

  3. Power Mac G4 Cube Airport Card Replacement, Accessing AirPort Card: paso 2, imagen 1 de 2 Power Mac G4 Cube Airport Card Replacement, Accessing AirPort Card: paso 2, imagen 2 de 2

    • Pull outwards on the antenna cable.

    • The cable should pop out of the card without much force.

    • Pull on the clear tab outwards to remove the existing AirPort card

    • Slide in the new AirPort card.

    • Reconnect the antenna cable.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

8 personas más completaron esta guía.

Autor

con 5 otros colaboradores

Ryan Chun

Miembro Desde 06/24/10

1,076 Reputación

7 Guías creadas

Insignias: 13

+ 10 más insignias

Equipo

Cal Poly, Team 2-7, Johann Summer 2010 Miembro de Cal Poly, Team 2-7, Johann Summer 2010

CPSU-JOHANN-R10S2G7

5 Miembros

14 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 21

Todo El Tiempo: 9,849