Introducción

When the screen on your camera breaks, the whole camera becomes unusable. This guide will show you how to replace the LCD screen on a Polaroid i533 camera.

Partes

No se requieren partes.

On the left-hand side of the camera screen, unscrew and remove the four 3mm screws, as shown in the photograph. On the right-hand side of the camera screen, unscrew and remove the two 3mm screws. On the bottom of the camera, unscrew and remove the three 3mm screws.
  • On the left-hand side of the camera screen, unscrew and remove the four 3mm screws, as shown in the photograph.

  • On the right-hand side of the camera screen, unscrew and remove the two 3mm screws.

  • On the bottom of the camera, unscrew and remove the three 3mm screws.

Agregar Comentario

Slide the battery door open and 'slightly' open the side of the case with the iFixit plastic opening tool.
  • Slide the battery door open and 'slightly' open the side of the case with the iFixit plastic opening tool.

Agregar Comentario

Be careful not to pull the cover off completely, it is still attached to the logic board.
  • Be careful not to pull the cover off completely, it is still attached to the logic board.

  • Gently pull the cover away from the rest of the camera. Do not separate the pieces completely.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Locate where the LCD screen ribbon is attached to the logic board. With the iFixit plastic opening tool, flip up the black tab that connects the LCD screen ribbon to the logic board.
  • Locate where the LCD screen ribbon is attached to the logic board.

  • With the iFixit plastic opening tool, flip up the black tab that connects the LCD screen ribbon to the logic board.

Agregar Comentario

Gently pull the ribbon away from the logic board. You can now separate the cover from the rest of the camera.
  • Gently pull the ribbon away from the logic board. You can now separate the cover from the rest of the camera.

Agregar Comentario

Locate the four screws in each corner of the LCD screen, unscrew and remove them. Keep them separate from the 3mm case screws.
  • Locate the four screws in each corner of the LCD screen, unscrew and remove them. Keep them separate from the 3mm case screws.

Agregar Comentario

Remove the LCD screen from the remaining casing of the camera.
  • Remove the LCD screen from the remaining casing of the camera.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

ashley

Miembro Desde 24/06/10

1 Reputación

1 Guía escrita

Equipo

Cal Poly, Team 3-4, Johann Summer 2010 Miembro de Cal Poly, Team 3-4, Johann Summer 2010

CPSU-JOHANN-R10S3G4

4 Miembros

4 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 9

Últimos 30 Días: 49

Todo El Tiempo: 3,002