Introducción

Use this guide to replace your PlayStation 3's smart plate.

Partes

No se requieren partes.

Use the tip of a spudger to remove the black rubber screw cover from the side of the PS3. The screw cover may be underneath a warranty sticker. This sticker will change appearance, and show "VOID" after it has been removed.
  • Use the tip of a spudger to remove the black rubber screw cover from the side of the PS3.

  • The screw cover may be underneath a warranty sticker. This sticker will change appearance, and show "VOID" after it has been removed.

Agregar Comentario

Remove the single 8.5 mm T10 Security Torx screw from the smart plate.
  • Remove the single 8.5 mm T10 Security Torx screw from the smart plate.

Agregar Comentario

Pull the smart plate toward the hard drive bay, then lift it off the body of the PS3. Pull the smart plate toward the hard drive bay, then lift it off the body of the PS3. Pull the smart plate toward the hard drive bay, then lift it off the body of the PS3.
  • Pull the smart plate toward the hard drive bay, then lift it off the body of the PS3.

Agregar Comentario

Be sure to keep track of the small metal bracket loosely held in the top cover, if equipped.
  • Be sure to keep track of the small metal bracket loosely held in the top cover, if equipped.

That small metal bracket/socket set up looks completely different in the ps3 I'm working on. Model: CECHK01.

Any suggestions?

Marcus - Contestar

Conclusión

To reassemble your device, follow these instructions in reverse order.

22 personas más completaron esta guía.

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 13

Últimos 30 Días: 69

Todo El Tiempo: 20,125