Remove screw covers, two are rubber feet, and the six screws located on the bottom of the console. Caution with the "Do not void" seal, underneath is also a screw Caution with the "Do not void" seal, underneath is also a screw
  • Remove screw covers, two are rubber feet, and the six screws located on the bottom of the console.

  • Caution with the "Do not void" seal, underneath is also a screw

Agregar Comentario

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
If all screws are removed. Use a metal spunger to open the chassis
  • If all screws are removed.

  • Use a metal spunger to open the chassis

Agregar Comentario

Slip the three cables out of the sockets. Use a PH01 screwdriver to remove the four screws securing the optical drive Lift up the optical drive and remove the duct tape under the flex cable.
  • Slip the three cables out of the sockets.

  • Use a PH01 screwdriver to remove the four screws securing the optical drive

  • Lift up the optical drive and remove the duct tape under the flex cable.

  • Now the optical drive is free and ready for replacement

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

9 personas más completaron esta guía.

tlroesner

Miembro Desde 13/05/12

1,697 Reputación

4 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 4

Últimos 7 Días: 24

Últimos 30 Días: 120

Todo El Tiempo: 14,552