Palm m105 case replacment

Introducción

This guide demonstrates how to replace the case of your Palm m105. The case on the Palm m105 can be easily removed, and a replacement shell casing can be used to replace your damaged one.

Before you begin this repair, power off your device and make sure it's unplugged from the charger.

Qué necesitas

Paso 1 Palm m105 case replacment

Palm m105 case replacment, Palm m105 case replacment: paso 1, imagen 1 de 1

Remove the protective flip lid of the device. Open the lid and pull.
There are two clips that will pop out.

Traducir

Paso 2

Unclip the tab at the top of the device, to remove the face plate.

Traducir

Paso 3

Remove the batteries by opening the battery compartment on the back of the device.
Remove one battery at a time.

Traducir

Paso 4

Using a T-5 Torx screwdriver, remove all four screws at the back of the device by turning them counterclockwise. A sample screwdriver is located here.

Traducir