Partes

No se requieren partes.

Remove protective flap by pulling directly out from the top.
  • Remove protective flap by pulling directly out from the top.

  • The two clips will pop out

Agregar Comentario

Remove Faceplate. There is a tab where the finger is located in the picture that needs to be pulled up.
  • Remove Faceplate. There is a tab where the finger is located in the picture that needs to be pulled up.

  • The Faceplate will then easily lift off.

Agregar Comentario

Using a a T5 Torx bit screwdriver, remove the four screws located on the back of the device turning counter clockwise. The link to purchase this screwdriver is Located here.
  • Using a a T5 Torx bit screwdriver, remove the four screws located on the back of the device turning counter clockwise.

  • The link to purchase this screwdriver is Located here.

Agregar Comentario

Guía de regalos para el día del padre
Honremos a más que nuestros padres—celebremos a todos los mentores que nos enseñaron a reparar.
Guía de regalos para el día del padre
Honremos a aquellos que nos enseñaron a reparar.
This is what the device looks like once you have taken the screws out and opened the device.
  • This is what the device looks like once you have taken the screws out and opened the device.

Agregar Comentario

The Motherboard and screen will pop out of the back case easily.
  • The Motherboard and screen will pop out of the back case easily.

    • Be careful when doing this step, the components are fragile.

Agregar Comentario

To remove the screen from the motherboard there are going to be three tabs that need to pulled up.
  • To remove the screen from the motherboard there are going to be three tabs that need to pulled up.

  • ** This step needs to be done with special care because it is very fragile.**

  • Once they are all three popped up the motherboard and screen will separate easily.

Agregar Comentario

Click here for Palm m105 screen replacement
  • Click here for Palm m105 screen replacement

  • Now that the screen and motherboard are separated you may discard the broken screen. The best way to dispose of the broken screen is to: Recycle it

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Erik Thompson

Miembro Desde 04/10/11

31 Reputación

5 Guías creadas

Equipo

UW Stout, Team 1-3, Zhou Fall 2011 Miembro de UW Stout, Team 1-3, Zhou Fall 2011

UWSTOUT-ZHOU-F11S1G3

4 Miembros

7 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 1

Todo El Tiempo: 423