Partes

No se requieren partes.

Press the button located just above the Sprint™ logo then slide the cover down. Press the button located just above the Sprint™ logo then slide the cover down. Press the button located just above the Sprint™ logo then slide the cover down.
  • Press the button located just above the Sprint™ logo then slide the cover down.

Agregar Comentario

Use the small notch on the left hand side of the phone to remove the battery. Use the small notch on the left hand side of the phone to remove the battery.
  • Use the small notch on the left hand side of the phone to remove the battery.

Agregar Comentario

Remove the stylus from the phone.
  • Remove the stylus from the phone.

Agregar Comentario

After removing the battery and stylus, unscrew the 5 Torx screws (using a T-5 Torx screw driver)
  • After removing the battery and stylus, unscrew the 5 Torx screws (using a T-5 Torx screw driver)

Agregar Comentario

Using the spudger, remove the small rubberized patch under the antenna.
  • Using the spudger, remove the small rubberized patch under the antenna.

Agregar Comentario

Guía de regalos para el día del padre
Honremos a más que nuestros padres—celebremos a todos los mentores que nos enseñaron a reparar.
Guía de regalos para el día del padre
Honremos a aquellos que nos enseñaron a reparar.
Unscrew the last two screws using the previous screw driver.
  • Unscrew the last two screws using the previous screw driver.

Agregar Comentario

Using the plastic opening tool, gently separate the back case from the phone body. Using the plastic opening tool, gently separate the back case from the phone body.
  • Using the plastic opening tool, gently separate the back case from the phone body.

Agregar Comentario

Using a plastic opening tool, gently edge your way between the back and border case (Picture 2) until they are completely separated (Picture 3). Using a plastic opening tool, gently edge your way between the back and border case (Picture 2) until they are completely separated (Picture 3). Using a plastic opening tool, gently edge your way between the back and border case (Picture 2) until they are completely separated (Picture 3).
  • Using a plastic opening tool, gently edge your way between the back and border case (Picture 2) until they are completely separated (Picture 3).

Agregar Comentario

Remove the antenna chip by unscrewing the two screws with Torx T-5 screwdriver (Picture 1). Once unscrewed, gently detach the antenna chip with your hands (Picture 2). Once unscrewed, gently detach the antenna chip with your hands (Picture 2).
  • Remove the antenna chip by unscrewing the two screws with Torx T-5 screwdriver (Picture 1).

  • Once unscrewed, gently detach the antenna chip with your hands (Picture 2).

Agregar Comentario

Use the plastic opening tool to unlock the tab holding the keyboard connection (Picture 1). Once the keyboard connection is detached, use your hands to gently separate the motherboard from the back panel (Picture 2).
  • Use the plastic opening tool to unlock the tab holding the keyboard connection (Picture 1).

  • Once the keyboard connection is detached, use your hands to gently separate the motherboard from the back panel (Picture 2).

Agregar Comentario

To completely detach the motherboard from the back panel, use the plastic opening tool to unlock the LCD connection from the motherboard (Picture 2). Once the LCD connection is unlocked, the motherboard should now be completely detached from the back panel, keyboard, and LCD (Picture 3). Once the LCD connection is unlocked, the motherboard should now be completely detached from the back panel, keyboard, and LCD (Picture 3).
  • To completely detach the motherboard from the back panel, use the plastic opening tool to unlock the LCD connection from the motherboard (Picture 2).

  • Once the LCD connection is unlocked, the motherboard should now be completely detached from the back panel, keyboard, and LCD (Picture 3).

Agregar Comentario

Using the plastic opening tool, loosen the metal camera holder.
  • Using the plastic opening tool, loosen the metal camera holder.

Agregar Comentario

Once the camera holder is loose, gently detach it from the camera.
  • Once the camera holder is loose, gently detach it from the camera.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Equipo

Cal Poly, Team 12-37, Regan Spring 2012 Miembro de Cal Poly, Team 12-37, Regan Spring 2012

CPSU-REGAN-S12S12G37

4 Miembros

14 Guías creadas

Does anyone know where or how to get a developers guide or geeks guide to tearing this phone down completely? I have a number of these, as well as old Galaxy Note phones, a broken S7 etc. And I would love to have the blueprint to know how to hack a LTE antenae, and S7 camera into my treo palm 700p..Wouldn't that be awesome? I still like it better than the modern smart phone, and just lost use of it when my carrier killed CDMA last week> :-(

peterveri - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 1

Todo El Tiempo: 471