Introducción

Replace the keyboard!!

On the back of the device, locate the 3 rubber plugs, and use a plastic spudger to remove them.
  • On the back of the device, locate the 3 rubber plugs, and use a plastic spudger to remove them.

Agregar Comentario

Use the T6 Torx Screwdriver to remove all 4 screws. You have to first remove the Stylus to  access the 4th screw.
  • Use the T6 Torx Screwdriver to remove all 4 screws.

  • You have to first remove the Stylus to access the 4th screw.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Using a plastic opening tool, carefully separate the front and back cases. Note: The antenna will detach from the phone.
  • Using a plastic opening tool, carefully separate the front and back cases.

  • Note: The antenna will detach from the phone.

Agregar Comentario

Using a T6 Torx Screwdriver, remove the two screws. The motherboard will now be loose from the front case.
  • Using a T6 Torx Screwdriver, remove the two screws.

  • The motherboard will now be loose from the front case.

Agregar Comentario

Using the spudger, flip open the clasp that holds the data ribbon in place.
  • Using the spudger, flip open the clasp that holds the data ribbon in place.

Agregar Comentario

Pull out the ribbon.
  • Pull out the ribbon.

  • The keyboard will disconnect from the phone.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Clement Poisson

Miembro Desde 26/01/10

24 Reputación

14 Guías creadas

Equipo

Cal Poly, Team 13-23, Maness Winter 2010 Miembro de Cal Poly, Team 13-23, Maness Winter 2010

CPSU-MANESS-W10S13G23

4 Miembros

16 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 1,410