Saltar al contenido principal

PSP 300xc Front Case Replacement

Qué necesitas

  1. PSP 300xc Front Case Replacement, Battery: paso 1, imagen 1 de 2 PSP 300xc Front Case Replacement, Battery: paso 1, imagen 2 de 2
    • Press the button securing the battery door to the PSP 300xc, and lift the battery door off.

    • Lift the battery out of the PSP.

  2. PSP 300xc Front Case Replacement, Front Case: paso 2, imagen 1 de 1
    • Use a spudger or your fingernail to remove the warranty sticker stuck to the inside of the battery tray

  3. PSP 300xc Front Case Replacement: paso 3, imagen 1 de 2 PSP 300xc Front Case Replacement: paso 3, imagen 2 de 2
    • Remove four Phillips screws from the back of the PSP.

  4. PSP 300xc Front Case Replacement: paso 4, imagen 1 de 1
    • Remove two Phillips screws from the top of the PSP.

  5. PSP 300xc Front Case Replacement: paso 5, imagen 1 de 1
    • Remove a single screw from the bottom edge of the PSP.

  6. PSP 300xc Front Case Replacement: paso 6, imagen 1 de 2 PSP 300xc Front Case Replacement: paso 6, imagen 2 de 2
    • Insert a spudger between the front case and PSP, and slide the spudger along the perimeter of the front case to remove it.

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Matthew Newsom

Miembro Desde 01/05/10

39,452 Reputación

67 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 8

Ultimos 30 días: 42

Todo El Tiempo: 3,378