Introducción
How to replace the two antenna on the OLPC XO-4 Touch.
Qué necesitas
-
-
Remove the two 4mm Phillips #1 screws underneath the screen on the right-hand side.
-
Rotate the screen 180° and remove the other two screws.
-
-
-
-
Gently unplug the two connectors by pulling them away from the motherboard.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.