Introducción

Make sure device is unplugged.

Remove slip mat from top of the platter.
  • Remove slip mat from top of the platter.

Agregar Comentario

Remove platter by inserting thumbs in holes and slowly pulling up.
  • Remove platter by inserting thumbs in holes and slowly pulling up.

  • There will be some initial resistance.

Agregar Comentario

Remove damaged belt which will be located below the platter.
  • Remove damaged belt which will be located below the platter.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Install new belt by securing it around the inner ring, located on the back of the platter.
  • Install new belt by securing it around the inner ring, located on the back of the platter.

Agregar Comentario

Place a thumb in each hole.
  • Place a thumb in each hole.

  • You should be able to feel the rubber belt.

  • Gently pull the belt with each thumb, keeping the belt taut around the inner ring.

Agregar Comentario

Secure platter back on turntable while keeping belt taut. Pull belt around motor spindle.
  • Secure platter back on turntable while keeping belt taut.

  • Pull belt around motor spindle.

  • Gently let go of belt.

Agregar Comentario

Test turntable by spinning the platter.
  • Test turntable by spinning the platter.

  • There should be slight tension causing the platter to come to a stop.

Agregar Comentario

Linea de Meta

Una persona más ha completado esta guía.

Nikolai

Miembro Desde 12/10/11

161 Reputación

5 Guías creadas

Equipo

Cal Poly, Team 17-14, Regan Fall 2011 Miembro de Cal Poly, Team 17-14, Regan Fall 2011

CPSU-REGAN-F11S17G14

4 Miembros

7 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 10

Últimos 30 Días: 44

Todo El Tiempo: 2,826