Repara tus cosas Comunidad Tienda

Nostalgia Electrics RHP-310 Power Switch Replacement

Introducción

If the device will not turn on or has a broken power switch, use this guide to replace the switch.

Qué necesitas

  1. Nostalgia Electrics RHP-310 Power Switch Replacement, Power Switch: paso 1, imagen 1 de 1

    • Unplug the popper.

    • Lift the lid up to remove it.

    Editar

  2. Nostalgia Electrics RHP-310 Power Switch Replacement: paso 2, imagen 1 de 1

    • Lay the popper on its side.

    • Remove the five 12mm Philips #2 screws around the perimeter of the base with the Phillips #2 screwdriver.

    • Remove the two 15mm Philips #2 screws in the center of the base with the Phillips #2 screwdriver.

    • Put the removed screws in a safe place, they will be needed later to reattach the housing to the base.

    Editar

  3. Nostalgia Electrics RHP-310 Power Switch Replacement: paso 3, imagen 1 de 1

    • Flip the base over to view the interior of the base panel.

    • Unscrew the two 10 mm Philips #2 screws from the base panel.

    • Remove the base and set it aside.

    Editar

  4. Nostalgia Electrics RHP-310 Power Switch Replacement: paso 4, imagen 1 de 2 Nostalgia Electrics RHP-310 Power Switch Replacement: paso 4, imagen 2 de 2

    • Locate the power switch connected to the side of the housing.

    • Pinch the sides of the power switch.

    • Push the power button up and out of the housing.

    Editar

  5. Nostalgia Electrics RHP-310 Power Switch Replacement: paso 5, imagen 1 de 1

    • Remove the wires connected to the power switch that should be detached from the housing.

    • Gently pry the wires loose from the power switch with the plastic opening tool.

    • The wires should easily pop out from the power switch.

    Editar

  6. Nostalgia Electrics RHP-310 Power Switch Replacement: paso 6, imagen 1 de 1

    • Remove the power switch from the housing unit.

    • You can now replace the power switch, if necessary.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 10 otros colaboradores

Dana Clarke

Miembro Desde 09/26/12

50 Reputación

6 Guías creadas

Insignias: 8

+ 5 más insignias

Equipo

Cal Poly, Team 16-57, Forte Fall 2012 Miembro de Cal Poly, Team 16-57, Forte Fall 2012

CPSU-FORTE-F12S16G57

5 Miembros

6 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 9

Todo El Tiempo: 1,049