Partes

No se requieren partes.

Flip the phone over to view the back. Remove the power and phone cords. Remove the power and phone cords.
  • Flip the phone over to view the back.

  • Remove the power and phone cords.

Agregar Comentario

Remove the seven 8mm Phillips #2 screws.
  • Remove the seven 8mm Phillips #2 screws.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Lift up the back cover slowly because there are still wires attached to the circuit board. Lifting the back cover should not require a lot of force; simply lift with your fingertips.
  • Lift up the back cover slowly because there are still wires attached to the circuit board.

  • Lifting the back cover should not require a lot of force; simply lift with your fingertips.

Agregar Comentario

Disconnect the rubber piece by pulling it out of the slot, freeing the back cover completely.
  • Disconnect the rubber piece by pulling it out of the slot, freeing the back cover completely.

Agregar Comentario

Remove the six 8mm Phillips #2 screws. Pull the speaker phone cover straight up.
  • Remove the six 8mm Phillips #2 screws.

  • Pull the speaker phone cover straight up.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Elizabeth

Miembro Desde 21/01/12

160 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 10-35, Amido Winter 2012 Miembro de Cal Poly, Team 10-35, Amido Winter 2012

CPSU-AMIDO-W12S10G35

4 Miembros

5 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 2

Últimos 30 Días: 5

Todo El Tiempo: 954