Introducción

You need a T5 screwdriver to remove the screws.

Partes

No se requieren partes.

In order to remove the back cover, you must press the indicated button.
  • In order to remove the back cover, you must press the indicated button.

Agregar Comentario

With the button pressed, apply light pressure and slide the back cover off. This will allow you to access the battery
  • With the button pressed, apply light pressure and slide the back cover off.

  • This will allow you to access the battery

Agregar Comentario

In order to remove the battery, pull it out from the same side that the rubber button is on.
  • In order to remove the battery, pull it out from the same side that the rubber button is on.

Agregar Comentario

Using a plastic opening tool, separate the back cover from the phone. Using a plastic opening tool, separate the back cover from the phone. Using a plastic opening tool, separate the back cover from the phone.
  • Using a plastic opening tool, separate the back cover from the phone.

Agregar Comentario

Continue along the edge with the plastic opening tool. Continue along the edge with the plastic opening tool.
  • Continue along the edge with the plastic opening tool.

Agregar Comentario

Guía de regalos para el día del padre
Honremos a más que nuestros padres—celebremos a todos los mentores que nos enseñaron a reparar.
Guía de regalos para el día del padre
Honremos a aquellos que nos enseñaron a reparar.
Gently, remove the back cover. Gently, remove the back cover. Gently, remove the back cover.
  • Gently, remove the back cover.

Agregar Comentario

Unscrew the indicated screws using the T5 screwdriver. Unscrew the indicated screws using the T5 screwdriver. Unscrew the indicated screws using the T5 screwdriver.
  • Unscrew the indicated screws using the T5 screwdriver.

Agregar Comentario

Open the phone up and use the plastic opening tool to remove the cover to the keyboard. Be careful not to break the plastic during this step; do your best not to force anything.
  • Open the phone up and use the plastic opening tool to remove the cover to the keyboard.

  • Be careful not to break the plastic during this step; do your best not to force anything.

Agregar Comentario

The button board will be loose once the cover is removed. Lift it up to reveal the sensor board.
  • The button board will be loose once the cover is removed.

  • Lift it up to reveal the sensor board.

Agregar Comentario

With the T5 Screwdriver, remove the marked screws. With the T5 Screwdriver, remove the marked screws.
  • With the T5 Screwdriver, remove the marked screws.

Agregar Comentario

With the screws removed, the sensor board should be free to flip up. With the screws removed, the sensor board should be free to flip up.
  • With the screws removed, the sensor board should be free to flip up.

Agregar Comentario

Disconnect the wire with the plastic opening tool. Disconnect the wire with the plastic opening tool.
  • Disconnect the wire with the plastic opening tool.

Agregar Comentario

Remove the screws marked. The Screw on the left is located underneath the cable. With those screws removed, the circuit board and sensor board will be detached from the rest of the phone.
  • Remove the screws marked.

  • The Screw on the left is located underneath the cable.

  • With those screws removed, the circuit board and sensor board will be detached from the rest of the phone.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Equipo

Cal Poly, Team 18-21, Garner Spring 2011 Miembro de Cal Poly, Team 18-21, Garner Spring 2011

CPSU-GARNER-S11S18G21

4 Miembros

7 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 19

Todo El Tiempo: 5,307