Introducción

In this guide you will be taking apart most of the phone in order to access the flash and replace it.

Partes

No se requieren partes.

Remove battery Remove battery
  • Remove battery

Agregar Comentario

Using Torx number 4 unscrew the four  0.5mm screws.
  • Using Torx number 4 unscrew the four 0.5mm screws.

Agregar Comentario

Push in four clips to detach the body.
  • Push in four clips to detach the body.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Separate the body into two pieces. Be careful not to damage the screen or body. Some force will be needed to separate the body. Be careful not to damage the screen or body. Some force will be needed to separate the body.
  • Separate the body into two pieces.

  • Be careful not to damage the screen or body. Some force will be needed to separate the body.

Agregar Comentario

Remove the bottom piece that is clipped on. Some force will need to be exerted to remove the clip. Some force will need to be exerted to remove the clip.
  • Remove the bottom piece that is clipped on.

  • Some force will need to be exerted to remove the clip.

Agregar Comentario

Using Torx number 4 unscrew the two 0.7 mm screws at the top of the device.
  • Using Torx number 4 unscrew the two 0.7 mm screws at the top of the device.

Agregar Comentario

Once screws are removed detach back of phone from the motherboard. This will require some force and maneuvering. Be careful not to break phone back or motherboard.
  • Once screws are removed detach back of phone from the motherboard.

  • This will require some force and maneuvering. Be careful not to break phone back or motherboard.

Agregar Comentario

Replace motherboard, ensure that replacement has the same serial number.
  • Replace motherboard, ensure that replacement has the same serial number.

Agregar Comentario

Camera is located on back of camera body.
  • Camera is located on back of camera body.

  • To remove flash turn body over and gently tap on the case. The flash should fall out.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Will Goldby

Miembro Desde 29/08/11

184 Reputación

4 Guías creadas

Equipo

Cuesta, Team 1-1, Zipperian Fall 2011 Miembro de Cuesta, Team 1-1, Zipperian Fall 2011

CUESTA-ZIPPERIAN-F11S1G1

3 Miembros

4 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 1

Todo El Tiempo: 958