Nokia 8290 Vibrator Replacement

Introducción

Installing a new vibration component is necessary when the vibrate mode on your phone is no longer functioning properly. Installation requires no prior knowledge of mobile phone vibrators.

Qué necesitas

Paso 1 Front Cover

Nokia 8290 Vibrator Replacement, Front Cover: paso 1, imagen 1 de 3

Nokia 8290 Vibrator Replacement, Front Cover: paso 1, imagen 2 de 3

Nokia 8290 Vibrator Replacement, Front Cover: paso 1, imagen 3 de 3

Locate the small button on the top of the phone.
Depress the button.
With your other hand, pull the front cover away from the phone.

Traducir

Paso 2 Vibrator

Nokia 8290 Vibrator Replacement, Vibrator: paso 2, imagen 1 de 3

Nokia 8290 Vibrator Replacement, Vibrator: paso 2, imagen 2 de 3

Nokia 8290 Vibrator Replacement, Vibrator: paso 2, imagen 3 de 3

Remove all six 5.3 mm long T6 screws.
Remove the circuit board/faceplate sub-assembly from the back of the phone.
Take care to place screws in a safe location.

Traducir

Paso 3

Nokia 8290 Vibrator Replacement: paso 3, imagen 3 de 3

After removing the circuit board/faceplate sub-assembly, locate the vibrator mechanism.
Remove the vibrator mechanism with tweezers by simply pulling it up and away from the phone.

Traducir