Introducción

This guide will show how to remove the phone's logic board.

Partes

No se requieren partes.

Press the button to remove the back cover. Pull the cover downward and lift it off while still pressing the button.
  • Press the button to remove the back cover.

  • Pull the cover downward and lift it off while still pressing the button.

Agregar Comentario

Lift the battery out of the phone by pushing down from the top and pulling out
  • Lift the battery out of the phone by pushing down from the top and pulling out

Agregar Comentario

Grip the front cover from the bottom.
  • Grip the front cover from the bottom.

Agregar Comentario

Lift the front cover off.
  • Lift the front cover off.

Agregar Comentario

Locate 6 screws on front of assembly and unscrew them using a T6 torx screwdriver.
  • Locate 6 screws on front of assembly and unscrew them using a T6 torx screwdriver.

Agregar Comentario

Insert spudger along edge of assembly and gently lift assembly away from case
  • Insert spudger along edge of assembly and gently lift assembly away from case

Agregar Comentario

Remove assembly from phone
  • Remove assembly from phone

Agregar Comentario

The logic board now sits on top of the phone.
  • The logic board now sits on top of the phone.

Agregar Comentario

Lift the logic board out of the phone.
  • Lift the logic board out of the phone.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Colby Leslie

Miembro Desde 05/10/10

1 Reputación

9 Guías creadas

Equipo

Cal Poly, Team 22-3, Maness Fall 2010 Miembro de Cal Poly, Team 22-3, Maness Fall 2010

CPSU-MANESS-F10S22G3

4 Miembros

9 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 1

Todo El Tiempo: 1,028