Introducción

Replacing the faceplate is very quick and simple to do.

To prevent shock, press down on the power button located on the top of the phone until the phone shuts off. Press down on the small gray button located on the back of the phone. Slide the back plate down and off.
  • To prevent shock, press down on the power button located on the top of the phone until the phone shuts off.

  • Press down on the small gray button located on the back of the phone.

  • Slide the back plate down and off.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
To remove the battery, begin by holding the phone sideways. Then, insert your thumb in the groove below the battery and push the battery up and out.
  • To remove the battery, begin by holding the phone sideways.

  • Then, insert your thumb in the groove below the battery and push the battery up and out.

Agregar Comentario

Locate the spudger. A photo of the correct spudger is provided to the left. Turn the front of the phone to face you. Find the two small square holes on the bottom left and right sides of the faceplate. Insert the spudger into each square hole and push up to detach the face plate.
  • Locate the spudger. A photo of the correct spudger is provided to the left.

  • Turn the front of the phone to face you. Find the two small square holes on the bottom left and right sides of the faceplate.

  • Insert the spudger into each square hole and push up to detach the face plate.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Shane

Miembro Desde 30/09/10

56 Reputación

6 Guías creadas

Equipo

Cal Poly, Team 14-38, Forte Fall 2010 Miembro de Cal Poly, Team 14-38, Forte Fall 2010

CPSU-FORTE-F10S14G38

5 Miembros

6 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 2

Últimos 30 Días: 3

Todo El Tiempo: 1,397