Saltar al contenido principal

Nintendo DSi XL Rear Bezel Replacement

Qué necesitas

  1. Nintendo DSi XL Rear Bezel Replacement, Rear Bezel: paso 1, imagen 1 de 3 Nintendo DSi XL Rear Bezel Replacement, Rear Bezel: paso 1, imagen 2 de 3 Nintendo DSi XL Rear Bezel Replacement, Rear Bezel: paso 1, imagen 3 de 3
    • Use a push pin to remove the four plastic screw covers on the front bezel.

  2. Nintendo DSi XL Rear Bezel Replacement: paso 2, imagen 1 de 1
    • Remove four Phillips screws securing the front bezel to the rear bezel.

  3. Nintendo DSi XL Rear Bezel Replacement: paso 3, imagen 1 de 2 Nintendo DSi XL Rear Bezel Replacement: paso 3, imagen 2 de 2
    • Using two hands, gently slide the rear bezel upwards.

    • The rear bezel will move only about 2 mm.

  4. Nintendo DSi XL Rear Bezel Replacement: paso 4, imagen 1 de 2 Nintendo DSi XL Rear Bezel Replacement: paso 4, imagen 2 de 2
    • Insert a spudger into the gap between the front and rear bezel

    • Rotate the spudger away from the DSi XL, prying the two bezels apart.

  5. Nintendo DSi XL Rear Bezel Replacement: paso 5, imagen 1 de 1
    • In the same manner as described above, continue prying along the top edge of the front and rear bezels.

  6. Nintendo DSi XL Rear Bezel Replacement: paso 6, imagen 1 de 1
    • Separate the rear bezel from the front bezel.

    • Do not attempt to completely remove the rear bezel yet. It is still attached to the front bezel by the rear-facing camera.

  7. Nintendo DSi XL Rear Bezel Replacement: paso 7, imagen 1 de 1
    • Use the flat end of a spudger to pry the rear camera off the rear bezel.

    • Remove the rear bezel.

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Matthew Newsom

Miembro Desde 01/05/10

39,452 Reputación

67 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 5

Ultimos 30 días: 17

Todo El Tiempo: 5,046