Introducción

Replace the outer casing of your camera if it is damaged.

Partes

No se requieren partes.

Remove the screw located near the speaker port using a Phillips 00 screwdriver.
  • Remove the screw located near the speaker port using a Phillips 00 screwdriver.

Agregar Comentario

Turn camera upside down so that the battery compartment is facing you.
  • Turn camera upside down so that the battery compartment is facing you.

  • Remove all four screws from the bottom of the camera with a Phillips 00 screwdriver.

Agregar Comentario

Rotate the camera to the opposite side where the A/V outlet is located.
  • Rotate the camera to the opposite side where the A/V outlet is located.

  • Unscrew and remove all four screws with a Phillips 00 screwdriver.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Turn the camera so that the Wi-Fi adapter is facing you.
  • Turn the camera so that the Wi-Fi adapter is facing you.

  • Unscrew and remove all four screws with a Phillips 00 screwdriver.

Agregar Comentario

Using a plastic opening tool, pry the front casing of the camera. Continue this motion all around the front casing of the camera. Gently pull apart the front casing from the rest of the camera.
  • Using a plastic opening tool, pry the front casing of the camera.

  • Continue this motion all around the front casing of the camera.

  • Gently pull apart the front casing from the rest of the camera.

Agregar Comentario

Using the plastic opening tool pry the back casing of the camera.
  • Using the plastic opening tool pry the back casing of the camera.

Agregar Comentario

Orange ribbon is fragile
  • Orange ribbon is fragile

  • Carefully pull apart the back casing of the camera from the front of the camera without tearing the orange ribbon.

Agregar Comentario

Pull down the on the black latch to carefully separate the orange ribbon from the motherboard. Pull apart the orange ribbon and front casing from the rest of the camera.
  • Pull down the on the black latch to carefully separate the orange ribbon from the motherboard.

  • Pull apart the orange ribbon and front casing from the rest of the camera.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Jessica Brough

Miembro Desde 22/01/12

105 Reputación

2 Guías creadas

Equipo

Cal Poly, Team 3-28, Amido Winter 2012 Miembro de Cal Poly, Team 3-28, Amido Winter 2012

CPSU-AMIDO-W12S3G28

4 Miembros

5 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 946