Turn the device over so it is upside-down.
  • Turn the device over so it is upside-down.

Agregar Comentario

Unscrew the 4 screws closest to the screen.
  • Unscrew the 4 screws closest to the screen.

Agregar Comentario

Flip over the device so it is right side up.
  • Flip over the device so it is right side up.

Agregar Comentario

Unscrew the 2 screws on the top of the device, next to the docking plug.
  • Unscrew the 2 screws on the top of the device, next to the docking plug.

Agregar Comentario

Take off top piece by using slight force and pulling off.
  • Take off top piece by using slight force and pulling off.

Agregar Comentario

Unscrew the button board with smaller screwdriver.
  • Unscrew the button board with smaller screwdriver.

Agregar Comentario

Lift off the button board.
  • Lift off the button board.

Agregar Comentario

Unscrew all visible of the screws on the black logic board cover with the larger screwdriver.
  • Unscrew all visible of the screws on the black logic board cover with the larger screwdriver.

Agregar Comentario

Lift the screen vertically straight up.
  • Lift the screen vertically straight up.

    • As you do this the logic board should move off with it.

Agregar Comentario

Flip the screen and the logic board over to the right side.
  • Flip the screen and the logic board over to the right side.

Agregar Comentario

Pull out the white plug that goes from the speakers to the logic board.
  • Pull out the white plug that goes from the speakers to the logic board.

  • Then plug back in making sure it is completely connected.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Michelle Read

Miembro Desde 26/09/12

1 Reputación

1 Guía escrita

Equipo

Cal Poly, Team 7-50, Forte Fall 2012 Miembro de Cal Poly, Team 7-50, Forte Fall 2012

CPSU-FORTE-F12S7G50

5 Miembros

8 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 1

Todo El Tiempo: 299