Repara tus cosas Comunidad Tienda

Neato XV-21 Battery Replacement/Removal

Introducción

This guide will show how to replace the dead, dying, or faulty batteries in your Neato XV-21.

Qué necesitas

  1. Neato XV-21 Battery Replacement/Removal, Back Panels of Neato XV-21: paso 1, imagen 1 de 1

    • Flip the Neato on its back so the bottom is exposed

    • Unscrew the seven screws.

    Traducir

  2. Neato XV-21 Battery Replacement/Removal: paso 2, imagen 1 de 1

    • Lift the panels to reveal the batteries, brush and fan

    • There should be little to no resistance during this step, do not continue if the pieces do not separate easily

    Traducir

  4. Neato XV-21 Battery Replacement/Removal: paso 3, imagen 1 de 1

    • The Neato's core components are now exposed and ready to be cleaned and/or replaced.

    Traducir

  5. Neato XV-21 Battery Replacement/Removal, Battery: paso 4, imagen 1 de 1

    • Pinch and pull the white connector to disconnect the battery from the device

    • Failure to complete this step could cause electric shock or later complications

    • Lift and remove the battery from the cavity

    • If replacing the battery, make sure to use proper disposal methods.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Un comentario

Can someone tell me the specs of screws for the back panels? unfortunately I lost the 8 screws!!!

mflorest - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 8

Ultimos 30 días: 22

Todo El Tiempo: 1,091