Introducción

Once the back cover, battery, motherboard, and keypad have been removed, the keypad cover will be accessible for removal.

Herramientas

No se requieren herramientas.

Partes

No se requieren partes.

Slide the cover release button towards the bottom of the phone Once the battery cover pops up, slide the cover towards the top of the phone and lift up.
  • Slide the cover release button towards the bottom of the phone

  • Once the battery cover pops up, slide the cover towards the top of the phone and lift up.

Agregar Comentario

Push the battery towards the top of the phone and lift up.
  • Push the battery towards the top of the phone and lift up.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
With a T5 screwdriver, unscrew the four T5 sized screws that hold the case back cover onto the rest of the case. Remove the plastic case back cover by gently pulling it away from the body of the phone, starting at one edge and working your way down to the other. Remove the plastic case back cover by gently pulling it away from the body of the phone, starting at one edge and working your way down to the other.
  • With a T5 screwdriver, unscrew the four T5 sized screws that hold the case back cover onto the rest of the case.

  • Remove the plastic case back cover by gently pulling it away from the body of the phone, starting at one edge and working your way down to the other.

Agregar Comentario

Lift the motherboard away from the case of the phone, being careful not to break the wire that goes up into the hinge. Peel the motherboard off of the keypad. The two pieces are glued together and separate without much effort. The motherboard should now be completely disconnected from the phone.
  • Lift the motherboard away from the case of the phone, being careful not to break the wire that goes up into the hinge.

  • Peel the motherboard off of the keypad. The two pieces are glued together and separate without much effort.

  • The motherboard should now be completely disconnected from the phone.

Agregar Comentario

Once the motherboard has been removed from the keypad, the keypad sensor can be detached from the phone at the hinge. Gently pry off the cable connecting the keypad sensor. The keypad sensor should now be completely separated from the phone.
  • Once the motherboard has been removed from the keypad, the keypad sensor can be detached from the phone at the hinge.

  • Gently pry off the cable connecting the keypad sensor. The keypad sensor should now be completely separated from the phone.

Agregar Comentario

Once the keypad has been removed, the keypad cover can be easily peeled back from the front phone cover molding. Care must be taken when inserting a new keypad cover. The keypad cover will have to be lined up to the corresponding holes of the phone casing.
  • Once the keypad has been removed, the keypad cover can be easily peeled back from the front phone cover molding.

  • Care must be taken when inserting a new keypad cover. The keypad cover will have to be lined up to the corresponding holes of the phone casing.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Katelyn

Miembro Desde 22/10/12

1 Reputación

2 Guías creadas

Equipo

Clemson, Team 14-2, Benson Fall 2012 Miembro de Clemson, Team 14-2, Benson Fall 2012

CLEM-BENSON-F12S14G2

4 Miembros

17 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 260