Saltar al contenido principal

Motorola i560 Side Volume Button Replacement

Qué necesitas

  1. Motorola i560 Side Volume Button Replacement, Battery: paso 1, imagen 1 de 1
    • Place thumb on the rubber tab on the lower back of the phone.

    • Push away from the phone to release back panel.

  2. Motorola i560 Side Volume Button Replacement: paso 2, imagen 1 de 1
    • Lift the back panel of the phone to expose battery (not shown here).

  3. Motorola i560 Side Volume Button Replacement, Side Volume Button: paso 3, imagen 1 de 1
    • Pull antenna up, away from the phone, to reveal two of six screws.

  4. Motorola i560 Side Volume Button Replacement: paso 4, imagen 1 de 1
    • Unscrew all six 5.4 mm screws on the back side of the phone using the T-6 screwdriver bit.

  5. Motorola i560 Side Volume Button Replacement: paso 5, imagen 1 de 2 Motorola i560 Side Volume Button Replacement: paso 5, imagen 2 de 2
    • Gently separate the front and back sides of the phone.

    • Be careful not to break or bend the ribbon cables.

  6. Motorola i560 Side Volume Button Replacement: paso 6, imagen 1 de 2 Motorola i560 Side Volume Button Replacement: paso 6, imagen 2 de 2
    • Detach the first ribbon cable by unplugging it from the logic board.

  7. Motorola i560 Side Volume Button Replacement: paso 7, imagen 1 de 3 Motorola i560 Side Volume Button Replacement: paso 7, imagen 2 de 3 Motorola i560 Side Volume Button Replacement: paso 7, imagen 3 de 3
    • Gently remove the side button by pulling the buttons away from the phone.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Haley S

Miembro Desde 03/11/13

10 Reputación

4 Guías creadas

Equipo

Clemson, Team 13-6, Benson Spring 2013 Miembro de Clemson, Team 13-6, Benson Spring 2013

CLEM-BENSON-S13S13G6

3 Miembros

10 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 158