Introducción

Removing the screen requires nearly a complete dis-assembly of the phone.

Partes

No se requieren partes.

Place thumb on the rubber tab on the lower back of the phone.
  • Place thumb on the rubber tab on the lower back of the phone.

  • Push away from the phone to release back panel.

Agregar Comentario

Lift the back panel of the phone to expose battery (not shown here).
  • Lift the back panel of the phone to expose battery (not shown here).

Agregar Comentario

Pull the antenna up to reveal two of the six screws.
  • Pull the antenna up to reveal two of the six screws.

Agregar Comentario

Unscrew all six screws on the back side of the phone using a T-6 bit.
  • Unscrew all six screws on the back side of the phone using a T-6 bit.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Gently separate the front and back sides of the phone, as shown in the picture. Be careful not to break or bend the ribbon cables.
  • Gently separate the front and back sides of the phone, as shown in the picture.

  • Be careful not to break or bend the ribbon cables.

Agregar Comentario

Detach the first ribbon cable by unplugging it from the motherboard. Detach the first ribbon cable by unplugging it from the motherboard.
  • Detach the first ribbon cable by unplugging it from the motherboard.

Agregar Comentario

Detach the speaker ribbon cable from the motherboard. Detach the speaker ribbon cable from the motherboard.
  • Detach the speaker ribbon cable from the motherboard.

Agregar Comentario

Remove the motherboard from the front half of the phone by gently shaking it loose. It should come out with little to no trouble.
  • Remove the motherboard from the front half of the phone by gently shaking it loose. It should come out with little to no trouble.

Agregar Comentario

Push lightly from the front of the keypad to remove it.
  • Push lightly from the front of the keypad to remove it.

Agregar Comentario

By applying force, "pop" the screen out of the connecting hinge frame of the phone. By applying force, "pop" the screen out of the connecting hinge frame of the phone.
  • By applying force, "pop" the screen out of the connecting hinge frame of the phone.

Agregar Comentario

Carefully slide the speaker ribbon cable through the slot in the front frame of the phone. Carefully slide the speaker ribbon cable through the slot in the front frame of the phone.
  • Carefully slide the speaker ribbon cable through the slot in the front frame of the phone.

Agregar Comentario

After sliding the ribbon cable through the front frame of the phone, the separated screen and phone frame will appear as shown.
  • After sliding the ribbon cable through the front frame of the phone, the separated screen and phone frame will appear as shown.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Ariel

Miembro Desde 11/03/13

16 Reputación

6 Guías creadas

Equipo

Clemson, Team 13-6, Benson Spring 2013 Miembro de Clemson, Team 13-6, Benson Spring 2013

CLEM-BENSON-S13S13G6

3 Miembros

10 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 108