Repara tus cosas Comunidad Tienda

Motorola Droid Bionic LCD Replacement

Qué necesitas

  1. Motorola Droid Bionic LCD Replacement, LCD: paso 1, imagen 1 de 1

    • Remove the back battery cover.

    Traducir

  2. Motorola Droid Bionic LCD Replacement: paso 2, imagen 1 de 1

    • Remove the battery

    Traducir

  3. Motorola Droid Bionic LCD Replacement: paso 3, imagen 1 de 2 Motorola Droid Bionic LCD Replacement: paso 3, imagen 2 de 2

    • Remove the 11 T4 Torx Screws

    • Next, remove the information sticker.

    Traducir

  5. Motorola Droid Bionic LCD Replacement: paso 4, imagen 1 de 2 Motorola Droid Bionic LCD Replacement: paso 4, imagen 2 de 2

    • Using a plastic removal tool, work around the edges of the back housing.

    • Lift off the back housing.

    Traducir

  6. Motorola Droid Bionic LCD Replacement: paso 5, imagen 1 de 3 Motorola Droid Bionic LCD Replacement: paso 5, imagen 2 de 3 Motorola Droid Bionic LCD Replacement: paso 5, imagen 3 de 3

    • Remove the two silver T4 screws securing the SIM tray.

    • Carefully lift the SIM tray to disconnect it from the board.

    • Carefully remove the plastic spacer beneath by lifting gently in the center with a plastic removal tool.

    • Then, using a plastic removal tool, disconnect the speaker & front facing camera assembly from the board. The speaker is attached with adhesive, so be careful not to rip the flex cable.

    Traducir

  7. Motorola Droid Bionic LCD Replacement: paso 6, imagen 1 de 1

    • Disconnect the 2 digitizer connectors using a plastic removal tool.

    • Then disconnect the LCD connector

    Traducir

  8. Motorola Droid Bionic LCD Replacement: paso 7, imagen 1 de 2 Motorola Droid Bionic LCD Replacement: paso 7, imagen 2 de 2

    • The board is now free from all connections. Carefully lift from the top and remove the board.

    Traducir

  9. Motorola Droid Bionic LCD Replacement: paso 8, imagen 1 de 2 Motorola Droid Bionic LCD Replacement: paso 8, imagen 2 de 2

    • Carefully peel the two flex cables from the back housing of the LCD. Be exceptionally careful during this process, as those flex cables can be easily ripped.

    • With the flex cables out of the way, you can now use a plastic opening tool to carefully pry the old LCD loose and out of the display.

    • If you're installing a new LCD, simply add it now and follow these instructions in reverse to complete the installation.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

4 personas más completaron esta guía.

Autor

con 3 otros colaboradores

Taylor

Miembro Desde 08/30/12

244 Reputación

1 Guía escrita

Insignias: 9

+ 6 más insignias

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 1

Ultimos 30 días: 1

Todo El Tiempo: 1,767