Introducción

If the wireless Bluetooth for the LE1600 does not work, you may need to replace it. This guide will take you through the steps to replace the Bluetooth module for your LE1600.

Partes

No se requieren partes.

Turn the device so the screen is facing down.
  • Turn the device so the screen is facing down.

Agregar Comentario

Slide the battery lock switch next to the power slider to the unlocked position. Slide the battery lock switch next to the power slider to the unlocked position.
  • Slide the battery lock switch next to the power slider to the unlocked position.

Agregar Comentario

Slide and hold the switch by the fan vent to the unlocked position. Firmly grasp the battery and pull away from tablet. When replacing the battery, place the end near the fan vent in first. Make sure to keep the other switch in the unlocked position while pushing the battery into place. When replacing the battery, place the end near the fan vent in first. Make sure to keep the other switch in the unlocked position while pushing the battery into place.
  • Slide and hold the switch by the fan vent to the unlocked position. Firmly grasp the battery and pull away from tablet.

  • When replacing the battery, place the end near the fan vent in first. Make sure to keep the other switch in the unlocked position while pushing the battery into place.

Agregar Comentario

Unscrew hard drive panel using a Phillips head #1 screwdriver.
  • Unscrew hard drive panel using a Phillips head #1 screwdriver.

  • (Our device was not given to us with a hard drive or a hard drive panel)

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Pull clear plastic tab to detach hard drive from tablet. Pull clear plastic tab to detach hard drive from tablet. Pull clear plastic tab to detach hard drive from tablet.
  • Pull clear plastic tab to detach hard drive from tablet.

Agregar Comentario

To disconnect the three white ribbon cables on the side closest to the hard drive connector, pull the white plastic tabs. To disconnect the three white ribbon cables on the side closest to the hard drive connector, pull the white plastic tabs.
  • To disconnect the three white ribbon cables on the side closest to the hard drive connector, pull the white plastic tabs.

Agregar Comentario

Pull the brown tabs to disconnect the white ribbon cable on the other side.
  • Pull the brown tabs to disconnect the white ribbon cable on the other side.

Agregar Comentario

Caution: do not pull on the wires, instead pull from the plastic connectors. To disconnect the remaining ribbon cables, pull the plastic connectors away from their connections.
  • Caution: do not pull on the wires, instead pull from the plastic connectors.

  • To disconnect the remaining ribbon cables, pull the plastic connectors away from their connections.

Agregar Comentario

With a Phillips #1 screwdriver, Unscrew the nine 10mm screws holding the case together.
  • With a Phillips #1 screwdriver, Unscrew the nine 10mm screws holding the case together.

Agregar Comentario

Using a spudger, press in the five tabs on the side where the battery was.
  • Using a spudger, press in the five tabs on the side where the battery was.

  • This should separate the two halves of the device. Carefully set the side with the display off to the side.

Agregar Comentario

Locate the Bluetooth board. Disconnect the ribbon cable by pulling on the plastic connector. Disconnect the ribbon cable by pulling on the plastic connector.
  • Locate the Bluetooth board.

  • Disconnect the ribbon cable by pulling on the plastic connector.

Agregar Comentario

Unscrew the 4mm screw holding the board onto the tablet. Lift the board out of the tablet and carefully set it aside.
  • Unscrew the 4mm screw holding the board onto the tablet.

  • Lift the board out of the tablet and carefully set it aside.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

David Troy

Miembro Desde 04/04/12

44 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 15-14, Forte Spring 2012 Miembro de Cal Poly, Team 15-14, Forte Spring 2012

CPSU-FORTE-S12S15G14

5 Miembros

5 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 5

Todo El Tiempo: 1,914