Saltar al contenido principal

Minolta Dimage Xt Capture Button Replacement

Qué necesitas

  1. Minolta Dimage Xt Capture Button Replacement, Casing: paso 1, imagen 1 de 3 Minolta Dimage Xt Capture Button Replacement, Casing: paso 1, imagen 2 de 3 Minolta Dimage Xt Capture Button Replacement, Casing: paso 1, imagen 3 de 3
    • Locate and remove the silver screws on each side of the camera.

    • Use the Phillips #00 Screwdriver to unscrew all 2.0mm (4 instances) and 4.0mm (2 instances) screws.

  2. Minolta Dimage Xt Capture Button Replacement: paso 2, imagen 1 de 3 Minolta Dimage Xt Capture Button Replacement: paso 2, imagen 2 de 3 Minolta Dimage Xt Capture Button Replacement: paso 2, imagen 3 de 3
    • Then, carefully pry apart the front and back outer casing away from the internal components.

    • Be aware of the ribbon wire that will disconnect when the casing is detached.

  3. Minolta Dimage Xt Capture Button Replacement, Capture Button: paso 3, imagen 1 de 1
    • Choosing the front half of the casing, locate the capture button on the top.

    • Using tweezers, apply pressure to the two black hooks (circled in red) while holding the button down from the outside of the case.

  4. Minolta Dimage Xt Capture Button Replacement: paso 4, imagen 1 de 1
    • The button will spring free. The capture device consists of the plastic button and a small metal spring.

    • The button can be reassembled by using the tweezers to place the spring rectangle-side down on the button and snapping the button back into place.

Conclusión

Reassemble the casing by reversing steps 1 and 2.

Megan Milam

Miembro Desde 03/11/13

28 Reputación

5 Guías creadas

Equipo

Clemson, Team 12-4, Benson Spring 2013 Miembro de Clemson, Team 12-4, Benson Spring 2013

CLEM-BENSON-S13S12G4

3 Miembros

14 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 4

Todo El Tiempo: 438