Saltar al contenido principal

Mad Catz Street Fighter IV FightPad RS-DP-LS Switch Replacement

Qué necesitas

  1. Mad Catz Street Fighter IV FightPad RS-DP-LS Switch Replacement, Rear and Side Case: paso 1, imagen 1 de 1
    • Use tweezers to completely remove the sticker from the rear of controller.

  2. Mad Catz Street Fighter IV FightPad RS-DP-LS Switch Replacement: paso 2, imagen 1 de 1
    • Find the seven 8.3 mm Phillips screws on the rear of the controller and remove them.

  3. Mad Catz Street Fighter IV FightPad RS-DP-LS Switch Replacement: paso 3, imagen 1 de 2 Mad Catz Street Fighter IV FightPad RS-DP-LS Switch Replacement: paso 3, imagen 2 de 2
    • Use a plastic opening tool to separate the rear and front casing by inserting it in-between the two cases.

    • Use the plastic opening tool to pry the two cases apart.

  4. Mad Catz Street Fighter IV FightPad RS-DP-LS Switch Replacement: paso 4, imagen 1 de 2 Mad Catz Street Fighter IV FightPad RS-DP-LS Switch Replacement: paso 4, imagen 2 de 2
    • Remove the two rubber side grips.

  5. Mad Catz Street Fighter IV FightPad RS-DP-LS Switch Replacement, RS-DP-LS Switch: paso 5, imagen 1 de 2 Mad Catz Street Fighter IV FightPad RS-DP-LS Switch Replacement, RS-DP-LS Switch: paso 5, imagen 2 de 2
    • Locate RS-DP-LS switch.

    • Pull upwards on the switch to remove it.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Jefferson Hsu

Miembro Desde 09/18/12

411 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 1-7, Propen Fall 2012 Miembro de Cal Poly, Team 1-7, Propen Fall 2012

CPSU-PROPEN-F12S1G7

4 Miembros

14 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 2

Todo El Tiempo: 1,450