Saltar al contenido principal

Macintosh PowerBook 165c Display Replacement

Qué necesitas

  1. Macintosh PowerBook 165c Display Replacement, Display: paso 1, imagen 1 de 1
    • Orientate the computer right side up and open the display case to reveal the display.

    • Use a plastic opening tool to remove the two small plastic plugs located on the display case just below the display.

  2. Macintosh PowerBook 165c Display Replacement: paso 2, imagen 1 de 1
    • Use a T8 torx screwdriver to remove the two, 7.7mm long screws that were revealed by removing the plastic plugs.

    • Twist counterclockwise to remove the screw.

    • Caution: Once the screws are removed, the display is only held by two screws. Handle delicately.

  3. Macintosh PowerBook 165c Display Replacement: paso 3, imagen 1 de 1
    • Grip the two bottom corners of the plastic display cover and gently pull towards yourself so that the display cover rotates about the top of the display case.

    • The display cover should release from top.

    • Remove the display case.

  4. Macintosh PowerBook 165c Display Replacement: paso 4, imagen 1 de 1
    • Locate the black connector on the right of the display. The connector can be identified by the pink, light blue, and white wires protruding from its side.

    • Remove the black connector from the circuit board by pulling it away from its adapter.

  5. Macintosh PowerBook 165c Display Replacement: paso 5, imagen 1 de 1
    • Using a T8 torx screwdriver, remove the four, 10.8mm long screws from the corners of the display.

    • Caution: The display is no longer supported and must be handled with care.

  6. Macintosh PowerBook 165c Display Replacement: paso 6, imagen 1 de 1
    • Carefully tilt the display downwards and rest it on the keyboard.

  7. Macintosh PowerBook 165c Display Replacement: paso 7, imagen 1 de 3 Macintosh PowerBook 165c Display Replacement: paso 7, imagen 2 de 3 Macintosh PowerBook 165c Display Replacement: paso 7, imagen 3 de 3
    • Locate the orange ribbon cable on the back of the display.

    • Open the white tab fastener by pulling it outward.

    • Remove the orange ribbon cable by gently pulling it away from the opened tab fastener.

    • The display is now free.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Jason

Miembro Desde 10/12/11

89 Reputación

4 Guías creadas

Equipo

Cal Poly, Team 6-3, Regan Fall 2011 Miembro de Cal Poly, Team 6-3, Regan Fall 2011

CPSU-REGAN-F11S6G3

4 Miembros

12 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 12

Todo El Tiempo: 2,198