Introducción

After removing the top cover you will be able to replace the mouse buttons.

Partes

No se requieren partes.

Hold the mouse in your hand so that the bottom side is facing upward.
  • Hold the mouse in your hand so that the bottom side is facing upward.

  • Locate the #1 screw towards the bottom half of the mouse.

  • Take the 4.76 mm Phillips screwdriver and unscrew the #1 screw that was previously located.

باز کردن پیچ زیر موس

h sh - Contestar

Place the mouse back on the hard surface, with the bottom side touching the hard surface. Gently, lift up the top cover of the mouse and remove.
  • Place the mouse back on the hard surface, with the bottom side touching the hard surface.

  • Gently, lift up the top cover of the mouse and remove.

جدا کردن قاب رو و زیر موس

h sh - Contestar

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Locate the two tabs that are protruding from the button assembly. Be careful not to break either of the two tabs by squeezing too hard.
  • Locate the two tabs that are protruding from the button assembly.

  • Be careful not to break either of the two tabs by squeezing too hard.

  • Now pinch the tabs together to free the buttons.

Agregar Comentario

Free the button assembly from the top cover by bringing the button section down. Then sliding the button assembly out from the top cover through the opening.
  • Free the button assembly from the top cover by bringing the button section down.

  • Then sliding the button assembly out from the top cover through the opening.

  • When fully parted the top cover and the button assembly should look like this.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Equipo

Cal Poly, Team 5-14, Forte Winter 2013 Miembro de Cal Poly, Team 5-14, Forte Winter 2013

CPSU-FORTE-W13S5G14

5 Miembros

7 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 2

Últimos 7 Días: 5

Últimos 30 Días: 18

Todo El Tiempo: 1,360