Repara tus cosas Comunidad Tienda

Linksys WAP54g Casing Replacement

Introducción

The Linskys WAP54g is not a very complex guide and is basically composed of the outer casing and the circuit board. This guide is pretty simple but will require the removal of a few screws and prying apart the casing. Note that taking apart the casing will void your warranty for this device.

Qué necesitas

  1. Linksys WAP54g Casing Replacement, Casing: paso 1, imagen 1 de 1

    • Power down and unplug the device.

    Traducir

  2. Linksys WAP54g Casing Replacement: paso 2, imagen 1 de 1

    • Start by removing the two black rubber stoppers that act as the cushions to the legs of the device. The stoppers are located on the bottom towards the front of the device.

    Traducir

  3. Linksys WAP54g Casing Replacement: paso 3, imagen 1 de 1

    • Once removed two small screws will be visible. With a small screwdriver unscrew the screws.

    Traducir

  5. Linksys WAP54g Casing Replacement: paso 4, imagen 1 de 1

    • Remove the blue front panel from the rest of the device. You can now see the main board.

    Traducir

  6. Linksys WAP54g Casing Replacement: paso 5, imagen 1 de 1

    • Now slide the bottom panel forward and remove it so the main board is attached to the bottom panel.

    Traducir

  7. Linksys WAP54g Casing Replacement: paso 6, imagen 1 de 1

    • From here, remove the wires and nuts connected to the back panel of the casing by pulling the nuts through the holes in the casing.

    Traducir

  8. Linksys WAP54g Casing Replacement: paso 7, imagen 1 de 1

    • Once the bottom panel is removed unscrew the screws from the main board to the bottom panel so the main board is independent of the bottom panel.

    Traducir

  9. Linksys WAP54g Casing Replacement: paso 8, imagen 1 de 1

    • From here, all of the pieces of the casing are removed and the main board is independent of the entire casing.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 6 otros colaboradores

Derek Myers

Miembro Desde 10/04/11

288 Reputación

5 Guías creadas

Insignias: 12

+ 9 más insignias

Equipo

Cal Poly, Team 21-21, Maness Fall 2011 Miembro de Cal Poly, Team 21-21, Maness Fall 2011

CPSU-MANESS-F11S21G21

5 Miembros

12 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 2,040