Saltar al contenido principal

Lenovo Yoga 720-13IKB Fan Replacement

Qué necesitas

  1. Lenovo Yoga 720-13IKB Fan Replacement, Bottom Cover: paso 1, imagen 1 de 3 Lenovo Yoga 720-13IKB Fan Replacement, Bottom Cover: paso 1, imagen 2 de 3 Lenovo Yoga 720-13IKB Fan Replacement, Bottom Cover: paso 1, imagen 3 de 3
    Herramienta utilizada en este paso:
    T5 Torx Screwdriver
    $5.49
    Comprar
    • Before you begin, be sure to turn off your laptop and discharge the battery down to 25%.

    • Start by flipping the device over so that you see the screws.

    • Remove seven Torx T5 short screws.

    • Remove three Torx T5 long screws.

  2. Lenovo Yoga 720-13IKB Fan Replacement: paso 2, imagen 1 de 3 Lenovo Yoga 720-13IKB Fan Replacement: paso 2, imagen 2 de 3 Lenovo Yoga 720-13IKB Fan Replacement: paso 2, imagen 3 de 3
    Herramienta utilizada en este paso:
    iFixit Opening Tool
    $1.99
    Comprar
    • Starting from the USB port, use your opening tool to gently pry up the case.

    • Make sure you are prying on the cover itself, not the metal shield around the USB port.

    • Pry along the laptop in the order shown by the arrows.

    • Do NOT pry along the top side, or you risk damaging the casing. Stay with the arrows.

  3. Lenovo Yoga 720-13IKB Fan Replacement: paso 3, imagen 1 de 3 Lenovo Yoga 720-13IKB Fan Replacement: paso 3, imagen 2 de 3 Lenovo Yoga 720-13IKB Fan Replacement: paso 3, imagen 3 de 3
    • Lift the case from the bottom side. NOT the side with the hinges.

    • When you feel resistance, do NOT keep lifting or you will damage the housing.

    • Once you feel resistance, gently pull the case towards you. (away from the hinges.)

    • Remove the case.

  4. Lenovo Yoga 720-13IKB Fan Replacement, Fan: paso 4, imagen 1 de 2 Lenovo Yoga 720-13IKB Fan Replacement, Fan: paso 4, imagen 2 de 2
    • Use a JIS #000 screwdriver to unscrew and remove the seven 2.5mm screws that secure the fan to the motherboard.

    • Remove the fan from the laptop.

    • Follow the instructions found here to reapply new thermal paste. If your replacement heat sink and fan assembly has thermal paste pre-applied, you'll simply need to remove the old thermal paste from the laptop.

Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 10

Ultimos 30 días: 32

Todo El Tiempo: 885