Introducción

This guide is designed to remove or replace the logic board of the LG VX6000.

Push the dark gray tab towards the top of the phone to release the battery.  The tab is located on the back of the phone.
  • Push the dark gray tab towards the top of the phone to release the battery. The tab is located on the back of the phone.

Remove battery

Ryan Brekke - Contestar

Remove battery pack.
  • Remove battery pack.

  • You will need to unhook the bottom of the battery pack from the slot.

Agregar Comentario

Set the battery aside.
  • Set the battery aside.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Pull the two rubber cushions out using tweezers.
  • Pull the two rubber cushions out using tweezers.

  • Only remove the two cushions that are circled!

Agregar Comentario

Unscrew the six screws seen on the back using a Phillips 00 Screwdriver.
  • Unscrew the six screws seen on the back using a Phillips 00 Screwdriver.

  • Remove screws carefully on an uncluttered surface. They are very small and could get lost.

Agregar Comentario

Remove the back of the phone using your hands.
  • Remove the back of the phone using your hands.

  • There is a pair of red and blue wires that plugs into the motherboard. These wires will snap if you force the pieces apart.

  • Remove the back of the phone very gently. Use your fingernail or tweezers to unplug the wires.

  • To reattach the back, you must plug these wires back in.

Agregar Comentario

Remove the metallic sticky tab on the top by peeling it off the metallic strip underneath.
  • Remove the metallic sticky tab on the top by peeling it off the metallic strip underneath.

Agregar Comentario

Pry and lift off the circuit connector, which is connected to the screen. Pry and lift off the circuit connector, which is connected to the screen.
  • Pry and lift off the circuit connector, which is connected to the screen.

Agregar Comentario

Lift the green motherboard up from the rest of the phone by pushing a corner away from the casing.
  • Lift the green motherboard up from the rest of the phone by pushing a corner away from the casing.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Adam Altman

Miembro Desde 14/01/10

1 Reputación

6 Guías creadas

Equipo

Cal Poly, Team 4-11, Forte Winter 2010 Miembro de Cal Poly, Team 4-11, Forte Winter 2010

CPSU-FORTE-W10S4G11

5 Miembros

10 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 3

Todo El Tiempo: 3,019