Introducción

Replacing the ribbon cable.

Turn the closed phone so that the back panel is facing you.
  • Turn the closed phone so that the back panel is facing you.

  • Press down and forward firmly on the gray tab in the middle of the phone.

Agregar Comentario

Now just lift up on the battery and remove it from the phone. Now just lift up on the battery and remove it from the phone.
  • Now just lift up on the battery and remove it from the phone.

Agregar Comentario

Remove the rubber grommet using a Spudger.
  • Remove the rubber grommet using a Spudger.

Agregar Comentario

Be sure not to lose the screws. They are small!
  • Be sure not to lose the screws. They are small!

  • Remove the five screws using a Phillips #00 Screwdriver.

Agregar Comentario

When removing back cover, be careful not to break the speaker wires. Using an iPod Opening Tool, carefully pry off the back cover. Using Tweezers, gently pull speaker wires out.
  • When removing back cover, be careful not to break the speaker wires.

  • Using an iPod Opening Tool, carefully pry off the back cover.

  • Using Tweezers, gently pull speaker wires out.

Agregar Comentario

Separate the two halves.
  • Separate the two halves.

Agregar Comentario

Carefully pry and lift up on the logic board using an iPod Opening Tool. Carefully pry and lift up on the logic board using an iPod Opening Tool. Carefully pry and lift up on the logic board using an iPod Opening Tool.
  • Carefully pry and lift up on the logic board using an iPod Opening Tool.

Agregar Comentario

Carefully flip the logic board up and out of the way.
  • Carefully flip the logic board up and out of the way.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Use an iPod Opening Tool to lift up on the keypad and pull it out. Use an iPod Opening Tool to lift up on the keypad and pull it out. Use an iPod Opening Tool to lift up on the keypad and pull it out.
  • Use an iPod Opening Tool to lift up on the keypad and pull it out.

Agregar Comentario

DO NOT TOUCH SOLDERING IRON. IT IS EXTREMELY HOT.
  • DO NOT TOUCH SOLDERING IRON. IT IS EXTREMELY HOT.

  • De-solder solder joint on front using Soldering Iron.

Agregar Comentario

De-solder solder joint on the back using Soldering Iron.
  • De-solder solder joint on the back using Soldering Iron.

Agregar Comentario

Carefully detach ribbon cable and remove logic board. Carefully detach ribbon cable and remove logic board. Carefully detach ribbon cable and remove logic board.
  • Carefully detach ribbon cable and remove logic board.

Agregar Comentario

Remove 4 rubber grommets using the Spudger.
  • Remove 4 rubber grommets using the Spudger.

Agregar Comentario

Remove 4 screws using the Phillips #00 Screwdriver.
  • Remove 4 screws using the Phillips #00 Screwdriver.

Agregar Comentario

Carefully pry off outer cover using iPod Opening Tool. Carefully pry off outer cover using iPod Opening Tool. Carefully pry off outer cover using iPod Opening Tool.
  • Carefully pry off outer cover using iPod Opening Tool.

Agregar Comentario

Remove speaker using the Spudger. Remove speaker using the Spudger.
  • Remove speaker using the Spudger.

Agregar Comentario

Remove vibrator using the Spudger. Remove vibrator using the Spudger.
  • Remove vibrator using the Spudger.

Agregar Comentario

Lift up LCD display using iPod Opening Tool. Lift up LCD display using iPod Opening Tool.
  • Lift up LCD display using iPod Opening Tool.

Agregar Comentario

DO NOT TOUCH THE SOLDERING IRON. IT IS EXTREMELY HOT!
  • DO NOT TOUCH THE SOLDERING IRON. IT IS EXTREMELY HOT!

  • De-solder solder joint using Soldering Iron.

Agregar Comentario

Pry off ribbon cable using iPod Opening Tool. Pry off ribbon cable using iPod Opening Tool.
  • Pry off ribbon cable using iPod Opening Tool.

Agregar Comentario

Turn phone so that the back side is facing you. Press blue button and remove top half using Spudger. Press blue button and remove top half using Spudger.
  • Turn phone so that the back side is facing you.

  • Press blue button and remove top half using Spudger.

Agregar Comentario

Remove cable from bottom section. Remove cable from bottom section.
  • Remove cable from bottom section.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

David Foster

Miembro Desde 11/04/10

1 Reputación

16 Guías creadas

Equipo

Cal Poly, Team 25-88, Amido Spring 2010 Miembro de Cal Poly, Team 25-88, Amido Spring 2010

CPSU-AMIDO-S10S25G88

4 Miembros

18 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 3,114