Saltar al contenido principal

LG Muziq LX570 Keypad Replacement

Qué necesitas

  1. LG Muziq LX570 Keypad Replacement, Battery: paso 1, imagen 1 de 2 LG Muziq LX570 Keypad Replacement, Battery: paso 1, imagen 2 de 2
    • Slide the battery cover release towards top of phone.

    • Place one finger at each side of the battery cover.

    • Lift and remove the battery cover.

  2. LG Muziq LX570 Keypad Replacement: paso 2, imagen 1 de 2 LG Muziq LX570 Keypad Replacement: paso 2, imagen 2 de 2
    • Place a finger at the top corner of the battery and lift out of the phone.

  3. LG Muziq LX570 Keypad Replacement, Rear Case: paso 3, imagen 1 de 2 LG Muziq LX570 Keypad Replacement, Rear Case: paso 3, imagen 2 de 2
    • Use the spudger to lift up the two screw covers at the top of the phone.

    • Remove all four Phillips#00 (3.3mm) screws with screwdriver.

  4. LG Muziq LX570 Keypad Replacement: paso 4, imagen 1 de 3 LG Muziq LX570 Keypad Replacement: paso 4, imagen 2 de 3 LG Muziq LX570 Keypad Replacement: paso 4, imagen 3 de 3
    • Use the spudger to lift up the rear case from the phone.

    • Note: Rear case is connected on all sides and will have to be detached on all sides before removal.

    • Remove the rear case from the device.

  5. LG Muziq LX570 Keypad Replacement, Motherboard: paso 5, imagen 1 de 3 LG Muziq LX570 Keypad Replacement, Motherboard: paso 5, imagen 2 de 3 LG Muziq LX570 Keypad Replacement, Motherboard: paso 5, imagen 3 de 3
    • Use the spudger to lift the motherboard from the phone.

  6. LG Muziq LX570 Keypad Replacement, Keypad: paso 6, imagen 1 de 3 LG Muziq LX570 Keypad Replacement, Keypad: paso 6, imagen 2 de 3 LG Muziq LX570 Keypad Replacement, Keypad: paso 6, imagen 3 de 3
    • Caution: The circuit board is connected via ribbon to the phone. Do not break this connection.

    • Note: The circuit board is attached by clips on both sides of the board. Detach each clip before removing the motherboard from the phone.

    • Use the spudger to detach the circuit board from the phone.

  7. LG Muziq LX570 Keypad Replacement: paso 7, imagen 1 de 3 LG Muziq LX570 Keypad Replacement: paso 7, imagen 2 de 3 LG Muziq LX570 Keypad Replacement: paso 7, imagen 3 de 3
    • Open the phone to expose the keypad.

    • Use your finger to push the keypad from the front towards the circuit board.

    • Remove the keypad from the phone.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Braden Burk

Miembro Desde 01/22/12

1 Reputación

5 Guías creadas

Equipo

Cal Poly, Team 3-29, Amido Winter 2012 Miembro de Cal Poly, Team 3-29, Amido Winter 2012

CPSU-AMIDO-W12S3G29

4 Miembros

14 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 693