Introducción

Use this guide to remove the speakers from the device.

Partes

No se requieren partes.

Use the spudger to pry out the indicated rubber squares. Use the #0 Phillips screwdriver to take out the revealed screws. Use the #0 Phillips screwdriver to take out the revealed screws.
  • Use the spudger to pry out the indicated rubber squares.

  • Use the #0 Phillips screwdriver to take out the revealed screws.

Agregar Comentario

Carefully lodge the spudger between the face plate and the hinge mechanism. Gently pry the face plate until it releases from place holders. Gently pry the face plate until it releases from place holders.
  • Carefully lodge the spudger between the face plate and the hinge mechanism.

  • Gently pry the face plate until it releases from place holders.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Using a spudger, detach the speakers from their place holders. Using a spudger, detach the speakers from their place holders.
  • Using a spudger, detach the speakers from their place holders.

Agregar Comentario

Using the spudger, pry between the speaker circuit board and base to detach with ease.
  • Using the spudger, pry between the speaker circuit board and base to detach with ease.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Harry Black

Miembro Desde 20/04/10

56 Reputación

2 Guías creadas

Equipo

Cal Poly, Team 10-44, Garner Spring 2010 Miembro de Cal Poly, Team 10-44, Garner Spring 2010

CPSU-GARNER-S10S10G44

4 Miembros

18 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 1,429