Introducción

This will show you how to remove the motherboard on your LG LX150

Partes

No se requieren partes.

First locate the button and the bottom of the cover where the arrow is. Press down on the button. While pushing down on the button, slide the cover up towards the hinge until the cover comes off. The battery will be visible after removing the back cover.
  • First locate the button and the bottom of the cover where the arrow is. Press down on the button.

  • While pushing down on the button, slide the cover up towards the hinge until the cover comes off.

  • The battery will be visible after removing the back cover.

Agregar Comentario

Simultaneously push the battery forward and pull up from the bottom. Simultaneously push the battery forward and pull up from the bottom.
  • Simultaneously push the battery forward and pull up from the bottom.

Agregar Comentario

Once the battery is loose it can be easily removed. The phone's ID tag will be visible once the battery is removed.
  • Once the battery is loose it can be easily removed. The phone's ID tag will be visible once the battery is removed.

  • Be careful of damaged or leaking batteries. If your battery appears damaged, remove it with care and find a replacement.

Agregar Comentario

Remove the 7 phillips screws indicated by the red arrows using the phillips #0 screwdriver. Insert the flat end of the spudger in-between the black and  blue phone casing on the side of the phone and split the the blue and black apart. Work your way around the perimeter of the cover, loosening all corners. Insert the flat end of the spudger in-between the black and  blue phone casing on the side of the phone and split the the blue and black apart. Work your way around the perimeter of the cover, loosening all corners.
  • Remove the 7 phillips screws indicated by the red arrows using the phillips #0 screwdriver.

  • Insert the flat end of the spudger in-between the black and blue phone casing on the side of the phone and split the the blue and black apart. Work your way around the perimeter of the cover, loosening all corners.

Agregar Comentario

Remove the internal back cover after loosening all the corners. The second picture below is what you will see after removing the internal back cover.
  • Remove the internal back cover after loosening all the corners.

  • The second picture below is what you will see after removing the internal back cover.

Agregar Comentario

Lift the motherboard from the bottom to loosen it.
  • Lift the motherboard from the bottom to loosen it.

Agregar Comentario

Remove the pin socket that connects the screen to the motherboard by pulling up away from the motherboard.
  • Remove the pin socket that connects the screen to the motherboard by pulling up away from the motherboard.

Agregar Comentario

Remove the motherboard. The keypad will now be visible, as shown in the second picture.
  • Remove the motherboard.

  • The keypad will now be visible, as shown in the second picture.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Daniel Simpson

Miembro Desde 18/04/10

60 Reputación

4 Guías creadas

Equipo

Cal Poly, Team 10-44, Garner Spring 2010 Miembro de Cal Poly, Team 10-44, Garner Spring 2010

CPSU-GARNER-S10S10G44

4 Miembros

18 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 1,353