Repara tus cosas Comunidad Tienda

LG L1200 Internal Speaker Replacement

Introducción

This guide will help you replace the internal speaker found in the earpiece of the phone.

Qué necesitas

  1. LG L1200 Internal Speaker Replacement, Inner LCD Screen: paso 1, imagen 1 de 1

    • Make sure you remove the battery by lifting the tab on the back of the phone before opening the case.

    • Flip open the phone and locate the four screw covers.

    Traducir

  2. LG L1200 Internal Speaker Replacement: paso 2, imagen 1 de 1

    • Remove all four screw covers by using an IPod opening tool. They should come off relatively easy.

    Traducir

  3. LG L1200 Internal Speaker Replacement: paso 3, imagen 1 de 1

    • Using a T6 Torx screwdriver, remove all four screws.

    Traducir

  4. LG L1200 Internal Speaker Replacement: paso 4, imagen 1 de 3 LG L1200 Internal Speaker Replacement: paso 4, imagen 2 de 3 LG L1200 Internal Speaker Replacement: paso 4, imagen 3 de 3

    • Once the screws are removed, use an IPod opening tool to separate the front cover from the inner screen cover.

    • Run the Ipod opening tool down both sides,disconnecting the tabs that hold the covers together.

    Traducir

  6. LG L1200 Internal Speaker Replacement: paso 5, imagen 1 de 2 LG L1200 Internal Speaker Replacement: paso 5, imagen 2 de 2

    • Pull the inner screen cover towards you and up in order to separate it from the front cover.

    Traducir

  7. LG L1200 Internal Speaker Replacement: paso 6, imagen 1 de 1

    • Remove the tape from the bottom of the LCD screen.

    Traducir

  8. LG L1200 Internal Speaker Replacement: paso 7, imagen 1 de 3 LG L1200 Internal Speaker Replacement: paso 7, imagen 2 de 3 LG L1200 Internal Speaker Replacement: paso 7, imagen 3 de 3

    • Carefully lift the LCD screen and peel it from the gold ribbon. The sticky connection runs all the way around the LCD screen.

    Traducir

  9. LG L1200 Internal Speaker Replacement: paso 8, imagen 1 de 3 LG L1200 Internal Speaker Replacement: paso 8, imagen 2 de 3 LG L1200 Internal Speaker Replacement: paso 8, imagen 3 de 3

    • Flip the screen over so that you can see the outer LCD screen and the circuit board.

    • Insert spudger in the bottom right corner.

    • Lift up and move the spudger across the bottom.

    • The third photo is rotated 180 degrees.

    Traducir

  10. LG L1200 Internal Speaker Replacement: paso 9, imagen 1 de 2 LG L1200 Internal Speaker Replacement: paso 9, imagen 2 de 2

    • Use the pointy side of the spudger to peel off the interior tape.

    • Flip the assembly over and peel the circuit board from the screen.

    Traducir

  11. LG L1200 Internal Speaker Replacement: paso 10, imagen 1 de 2 LG L1200 Internal Speaker Replacement: paso 10, imagen 2 de 2

    • Use the spudger to remove the LCD screen from its backing.

    Traducir

  12. LG L1200 Internal Speaker Replacement, Internal Speaker: paso 11, imagen 1 de 1

    • Desolder the wires connecting the speaker.

    • Solder on wires from new speaker.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 5 otros colaboradores

Joshua Herrmann

Miembro Desde 04/16/10

8 Reputación

8 Guías creadas

Insignias: 4

+1 mas insignia

Equipo

Cal Poly, Team 6-14, Maness Spring 2010 Miembro de Cal Poly, Team 6-14, Maness Spring 2010

CPSU-MANESS-S10S6G14

4 Miembros

16 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 1

Todo El Tiempo: 1,415