Saltar al contenido principal

LG L1200 Camera Replacement

Qué necesitas

  1. LG L1200 Camera Replacement, Inner LCD Screen: paso 1, imagen 1 de 1
    • Make sure you remove the battery by lifting the tab on the back of the phone before opening the case.

    • Flip open the phone and locate the four screw covers.

  2. LG L1200 Camera Replacement: paso 2, imagen 1 de 1
    • Remove all four screw covers by using an IPod opening tool. They should come off relatively easy.

  3. LG L1200 Camera Replacement: paso 3, imagen 1 de 1
    • Using a T6 Torx screwdriver, remove all four screws.

  4. LG L1200 Camera Replacement: paso 4, imagen 1 de 3 LG L1200 Camera Replacement: paso 4, imagen 2 de 3 LG L1200 Camera Replacement: paso 4, imagen 3 de 3
    • Once the screws are removed, use an IPod opening tool to separate the front cover from the inner screen cover.

    • Run the Ipod opening tool down both sides,disconnecting the tabs that hold the covers together.

  5. LG L1200 Camera Replacement: paso 5, imagen 1 de 2 LG L1200 Camera Replacement: paso 5, imagen 2 de 2
    • Pull the inner screen cover towards you and up in order to separate it from the front cover.

  6. LG L1200 Camera Replacement: paso 6, imagen 1 de 1
    • Remove the tape from the bottom of the LCD screen.

  7. LG L1200 Camera Replacement: paso 7, imagen 1 de 3 LG L1200 Camera Replacement: paso 7, imagen 2 de 3 LG L1200 Camera Replacement: paso 7, imagen 3 de 3
    • Carefully lift the LCD screen and peel it from the gold ribbon. The sticky connection runs all the way around the LCD screen.

  8. LG L1200 Camera Replacement: paso 8, imagen 1 de 3 LG L1200 Camera Replacement: paso 8, imagen 2 de 3 LG L1200 Camera Replacement: paso 8, imagen 3 de 3
    • Flip the screen over so that you can see the outer LCD screen and the circuit board.

    • Insert spudger in the bottom right corner.

    • Lift up and move the spudger across the bottom.

    • The third photo is rotated 180 degrees.

  9. LG L1200 Camera Replacement: paso 9, imagen 1 de 2 LG L1200 Camera Replacement: paso 9, imagen 2 de 2
    • Use the pointy side of the spudger to peel off the interior tape.

    • Flip the assembly over and peel the circuit board from the screen.

  10. LG L1200 Camera Replacement: paso 10, imagen 1 de 2 LG L1200 Camera Replacement: paso 10, imagen 2 de 2
    • Use the spudger to remove the LCD screen from its backing.

  11. LG L1200 Camera Replacement, Camera: paso 11, imagen 1 de 1
    • Carefully slide the spudger behind the main ribbon in order to separate it from the inside cover of the phone.

  12. LG L1200 Camera Replacement: paso 12, imagen 1 de 2 LG L1200 Camera Replacement: paso 12, imagen 2 de 2
    • Use a spudger to pop off the camera ribbon from the main ribbon. The camera component should separate entirely.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Joshua Herrmann

Miembro Desde 04/16/10

8 Reputación

8 Guías creadas

Equipo

Cal Poly, Team 6-14, Maness Spring 2010 Miembro de Cal Poly, Team 6-14, Maness Spring 2010

CPSU-MANESS-S10S6G14

4 Miembros

16 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 1,208