Introducción

Use this guide to replace the back cover.

Partes

No se requieren partes.

Remove the two 6.2mm Phillips screws on both sides of camera's back cover. Remove the two 6.2mm Phillips screws on both sides of camera's back cover.
  • Remove the two 6.2mm Phillips screws on both sides of camera's back cover.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Turn camera so the bottom is facing up and the front is facing away.
  • Turn camera so the bottom is facing up and the front is facing away.

  • Remove the two 6.2mm Phillips screws on the bottom back cover of the camera.

  • Back cover is now unscrewed an can be removed.

Agregar Comentario

Have the back of the camera facing up.
  • Have the back of the camera facing up.

  • Unscrew the 6.2mm Phillips screw next to the viewfinder.

  • The back cover is now unscrewed. Lift up and pull the cover off evenly.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Michelle

Miembro Desde 04/04/11

86 Reputación

5 Guías creadas

Equipo

Cal Poly, Team 25-28, Garner Spring 2011 Miembro de Cal Poly, Team 25-28, Garner Spring 2011

CPSU-GARNER-S11S25G28

4 Miembros

6 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 6

Todo El Tiempo: 1,024