Introducción

Use this guide to remove and install the LCD screen.

Position the camera with the bottom facing up. With your finger, slide the battery cover in the direction of open arrow. The battery cover will spring open, so be careful to lift it up gently.
  • Position the camera with the bottom facing up.

  • With your finger, slide the battery cover in the direction of open arrow.

  • The battery cover will spring open, so be careful to lift it up gently.

Agregar Comentario

Use a Phillips #00 screwdriver to remove the seven 4.5mm screws. There are 2 on the left There are 2 on the right
  • Use a Phillips #00 screwdriver to remove the seven 4.5mm screws.

    • There are 2 on the left

    • There are 2 on the right

    • There are 3 on the bottom

Agregar Comentario

Firmly grasp and pull back casing off. Firmly grasp and pull back casing off. Firmly grasp and pull back casing off.
  • Firmly grasp and pull back casing off.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
With battery door open, grasp the front case and remove it from the camera. With battery door open, grasp the front case and remove it from the camera. With battery door open, grasp the front case and remove it from the camera.
  • With battery door open, grasp the front case and remove it from the camera.

Agregar Comentario

Locate the 2 solder joints on the LCD casing. De-solder the joints. De-solder the joints.
  • Locate the 2 solder joints on the LCD casing.

  • De-solder the joints.

Agregar Comentario

Grasp lower right side of LCD screen. Gently lift the screen out of its casing. Remove 3mm screw from LCD casing using #00 screwdriver.
  • Grasp lower right side of LCD screen.

  • Gently lift the screen out of its casing.

  • Remove 3mm screw from LCD casing using #00 screwdriver.

Agregar Comentario

Grab LCD casing. Remove it from camera. Remove it from camera.
  • Grab LCD casing.

  • Remove it from camera.

Agregar Comentario

Locate black tab connected to LCD ribbon. Lift black tab gently with one finger.
  • Locate black tab connected to LCD ribbon.

  • Lift black tab gently with one finger.

  • Remove ribbon from beneath black tab.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Alan Galarza

Miembro Desde 03/10/10

69 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 7-51, Amido Fall 2010 Miembro de Cal Poly, Team 7-51, Amido Fall 2010

CPSU-AMIDO-F10S7G51

4 Miembros

7 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 3

Todo El Tiempo: 3,581