Saltar al contenido principal

Handspring Visor Edge Back Panel Replacement

Qué necesitas

  1. Handspring Visor Edge Back Panel Replacement, Back Panel: paso 1, imagen 1 de 1
    • Remove the six 4.1 mm Phillips screws from the back plate using the #00 Phillips Scewdriver.

  2. Handspring Visor Edge Back Panel Replacement: paso 2, imagen 1 de 1
    • Remove the gray back plate from the PDA.

  3. Handspring Visor Edge Back Panel Replacement: paso 3, imagen 1 de 2 Handspring Visor Edge Back Panel Replacement: paso 3, imagen 2 de 2
    • Remove the four 2.6 mm Philips screws that are on the sides of the frame.

    • Remove the 3.9 mm Philips screw holding the stylus holster to the frame.

  4. Handspring Visor Edge Back Panel Replacement: paso 4, imagen 1 de 2 Handspring Visor Edge Back Panel Replacement: paso 4, imagen 2 de 2
    • Remove the four 2.6 mm Philips screws on the top and bottom of the frame.

  5. Handspring Visor Edge Back Panel Replacement: paso 5, imagen 1 de 1
    • Gently remove the white frame from the back of the PDA.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Nick Lazarakis

Miembro Desde 01/23/11

331 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 11-28, Maness Winter 2011 Miembro de Cal Poly, Team 11-28, Maness Winter 2011

CPSU-MANESS-W11S11G28

4 Miembros

7 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 3

Todo El Tiempo: 1,097